We spent many hours on research to finding 9v long range relay, reading product features, product specifications for this guide. For those of you who wish to the best 9v long range relay, you should not miss this article. 9v long range relay coming in a variety of types but also different price range. The following is the top 10 9v long range relay by our suggestions
852 reviews analysed
1. DC 5V 6V 9V 12V Wireless Control Switch 433mhz Remote Relay Latching Switch, 12V Long Range Remote Transmitter and Receiver for Indoor and Outdoor Use
Feature
- Product advantages: Small size and easy installation. This product can be installed in a small concealed space, with flexible control ， the relay with a casing, which has better protection and prolongs the service life of the product
- This RF remote control adopts RF technology, stable signal. Signal of the wireless RF switch can pass through walls, floors and doors, steadily control receiver from any place within a reliable distance, Max range is up to 30m with no obstacle.
- The wireless remote control switch is easy to use and safety, we send Latched mode default. the Working Voltage: DC3.5V-DC12V
- Max Load: 1A (have better Load less than 700ma)
- Application: control outdoor advertising, engineering special equipment, led light，digital circuit electrical interface, remote controller, wireless controller, control LED, etc.
- Working Mode：we send latched mode default，You can change the working mode yourself. Customer satisfaction is our goal，so If you encounter any problems in use, please feel free to contact us any time, we will be happy to serve you, thank you very much
Description
Description:
Working Voltage:DC3.5V-DC12V
Wide Range Working Voltage: DC3.5V 4V 5V 6V 9V 12V
Max Load: 1A (have better Load less than 700ma)
Quiescent Current: 4ma
Relay Working Current:20-30ma
Size: PCB : 34*14*7.4mm Case :39.5*20*10.5mm
Working Mode: Momentary Toggle Latched Delay time adjustable
Working model
Momentary–press one button is working /ON. loosen your finger on the same button is stop/OFF
Toggle–press one button for one time is working/ON .press the same button again is stop/OFF
Latched–press one button is working/ON ,press another button is stop/OFF
Delay time–Press one button, the corresponding relay actuates and keeps working until the time out
notice:We send Latching mode,If you need to change the working mode, you need to clear the code first,Clearing method :Press the Learning button . Until the receiver Led indicator flash for 5 times, it mean successfully
Learn method:Input 3.5V–12V for the Receiver
1.Momentary: Press the Learning Button 1 times. Then press transmitter, the Led indicator flash for 3 times, it mean successfully
2.Toggle:Press the Learning Button 2 times. Then press transmitter , the Led indicator flash for 3 times, it mean successfully.
3.Latched: Press the Learning Button 3 times. Then press transmitter one button, the Led indicator flash for 3 times,Then press another button,the Led indicator flash for 3 times again,it mean successfully
4.Delay time (5S): Press the Learning Button 4 times.Then press transmitter, the Led indicator flash for 3 times, it mean successfully
5.Delay time (10S): Press the Learning Button 5 times. Then press transmitter, the Led indicator flash for 3 times, it mean successfully
6.Delay time (15S): Press the Learning Button 6 times. Then press transmitter, the Led indicator flash for 3 times, it mean successfully
Package Include:
1 x Receiver (with black shell )
1 x Transmitter
2. Wireless Relay 12V Long Range Remote Control Switch, Universal 433Mhz RF Transmitter Receiver Mini Remote Relay in Latched Module for Home Use and More DC 3.7V 4.5V 5V 6V 7.4V 9V 12V
Feature
- ✔️【Applications】:The Wireless RF Switch is a learning code wireless remote, the remote relay switch can be used in from simple home remote controls to a wide range of autonomous controls such as DIY, LED lights, battery power switches, lamp beads, small LEDs, relays, light bulbs, buzzers, trumpet, circuit boards, etc.
- ✔️【3280 FEET LONG DISTANCE RECEIVE SIGNAL】:The signal of the wireless remote control switch can pass through the wall, floor and door, stably control the receiver from anywhere within a reliable distance. The range of use is up to 200 meters to 1000 meters (600 ft — 3280 ft) with no obstacle.
- ✔️【Advantage】The performance is stable and reliable, and the receiving sensitivity is high, Resist Interference：The RF remote control adopts non-directional wireless encoding technology, allowing independent control without mutual interference.
- ✔️【Item specifics】The remote control switch Working Voltage DC3.5V-DC12V
- Channel: 1CH
- Max Current: 1A
- Frequency: : 433MHZ
- ✔️【Wireless Control】: we send latched mode default ( that is, Press the button A , the receiver relay is ON
- Press the button B, the receiver relay is OFF ). If you encounter any problems in use, please feel free to contact us any time, we will be happy to serve you, thank you very much
Description
This is a simple, safe, convenient, widely used, compact and flexible remote control switch.
*Working Voltage: DC3.5V-DC12V
*This remote control will work more then 300M
*Wide Range Working Voltage DC3.7V 4.5V 5V 6V 9V 12V
*it can work with DC Power / Rechargeable lithium battery / Rechargeable
*Max Load: 1A (have better Load less than 700ma)
*Quiescent Current: 5ma
*Relay Working Current: 20-30ma
.Working Mode: Momentary. Toggle .Latched adjustable
(Notice: we send latched mode default . If you want to change the working mode, please use solder tool to operate)
How to change working mode :
★Momentary : Connect the right side 2 points (M) with a soldering iron
★Toggle : Let Point L and Point M in non-occupation
Encoding Type: Learning point to add extra transmitter
Learning method：Input 3.5V – 12V for the Receiver ,Connect the learning point with tweezers, the receiver LED indicator lights up or flashes, Press remote button A 1 time, Led indicator flash for 3 times , Then Press remote button B 1 time , Led indicator flash for 3 times again , it mean learning successfully
.Normally Open Port (NO) Common Port (COM) Normally Close Port (NC) Input DC3.5V-DC12V Output 0V Switching Value
1.Momentary—press one button is working /ON. loosen your finger on the same button is stop/OFF .(one channel switch need one button remote)
2.Toggle—press one button for one time is working/ON .press the same button again is stop/OFF .(one channel switch need one button remote)
3.Latched—press one button is working/ON ,press another button is stop/OFF . ( one channel switch need 2 buttons remote )
Package Include:
1 x Receiver(without cover)
1 x Transmitter(with battery)
3. 12V Motor Remote Control Switch 433Mhz Remote Momentary RF Switch, Wireless Remote Relay Forward Reverse Switch Long Range RF Transmitter and Receiver DC3V 3.7V 4.2V 4.5V 5V 6V 7.4V 9V 12V
Feature
- 【SAFE】Working voltage: DC3V-12V ( battery please more than DC3.7V). The wireless remote control switch adopts radio frequency identification technology. it has stable and reliable performance, and has the advantages of simple use, safety and reliability.
- 【USE】it is suitable for battery-powered motor, especially the door mini motor which with a small battery-powered.
- 【Range of the motor remote switch】Signal of the wireless RF switch can pass through walls, floors and doors, steadily control receiver from any place within a reliable distance, Max range is up to 50m with no obstacle.
- 【Most Prominent Advantages】ultra-low power standby
- (No Noise ) silent receiver. Notice: it is the world’s smallest motor controller, the motor’s voltage and current goes through the receiver. before your purchase please measure your motor exact working voltage and Current .
- 【Great Service】 we send momentary mode default . If you encounter any problems in use, please feel free to contact us, we will be happy to serve you, thank you very much
Description
Description
*The world’s smallest micro-motor forward and reverse Remote controller,it input DC3V-12V output DC3V-12V,to control the output positive(VCC+) and negative(GND-) exchange, voltage from DC3V to 12V is ok
*MOS non-contact(Contactless) (No Noise )silent receiver, ultra-low power standby current is only 0.5mA, it is suitable for battery-powered motor,especially the door mini motor which with a small battery-powered.
Working voltage: DC3V-12V ( battery please more than DC3.7V)(Wide working voltage DC3V-12V , 3.3V–12V All is ok)
Working current: 6ma
Standby current: 0.5ma
Operating frequency: 433.92MHZ
Size: 21*11*5mm
*(Ultra low standby current, it is suitable for battery-powered, when it is standby will automatically enter the low-power sleep state, please press the remote control button hold for 0.5 seconds or more)
*Maximum load: 0.4A (400ma mA) have better load less than 0.2A (200ma mA)
The receiver itself with overcurrent protection, when the current exceeds the rated current,will be entered into turn off power protection,such as the motor to start or block the current is doubled,beyond the rated current will be flash
Working Mode
*1.Momentary–Press the button “Up arrow”,the Motor Forward,Release is Stop;Press the button“Down arrow”, the Motor Reverse,Release is Stop.
*2.Latched–Press the button“Up arrow”the Motor Forward,Press “Square button ” is Stop;Press the button“Down arrow”, the Motor Reverse,Press “Square button ” is Stop
Notice: we send latched mode default
change to momentary: Connect the Learning Button(Used tweezers) Until the receiver Led indicator flash for 2 times, it mean Change M4 successfully. 1:Input 12V for the Receiver,Connect the Learning Button,don’t release 2:the Led indicator will flash for 1 times,don’t release . 3:the Led indicator will flash for 2 times then release,the working mode will change Momentary
Package Include:
1 x Receiver
1 x Transmitter
4. Supreform Universal Waterproof 2 Channel Relay 12V 24VDC/AC 2000FT(600m) Long Range Remote Control Switch for Lights, Water Pump, Heater, Garage Door Gate Opener, Pre-Wired 3.3 Feet External Receiver
Feature
- LONG DISTANCE RF SWITCH – Higher RF sensitivity of extended range receiver for super long range and more stable performance! You can remote control your garage door & gate opener up to 2000FT (600 yards) far away!
- EASY TO PROGRAM AND WIRE – The working mode of the switch has been set to momentary mode. It can be easily changed to toggle or lock mode. Do not require complex programming procedure! The receiver switch has been pre-wired 3.3ft (1m) cord before shipment for easy wire connection! There is no need to open the case or drill the hole to connect the wires! You may need to change big size wires to control the load current over 2A.
- UNIVERSAL – The remote control switch can be powered by wide range power input 9-24VDC/AC which makes it can be used for gate & garage door opener control and other devices on/off switch, such as light, water pump motor, etc.. It can controls up to 2 separate devices via the 2 buttons of the remote control! The remote control switch is homelink compatible!
- WATERPROOF – The remote control switch is ideal for outdoor using. There is a rubber ring for protecting the cable which can enhance the waterproof effect!
- SECURE – The remote control has individual code. The remote control can be programmed & deleted to the receiver as you need. Don’t worry about losing the remote control!
Description
1.Product Description:
The supreform universal 2 Channel Long Range remote control kit is an ideal accessory for your garage door & gate opener, lights, water pump and heaters.
The working mode of the switch has been set to momentary mode in factory. It can be easily changed to toggle or lock mode according to you needs.
The powerful remote control included in the kit can operate your garage door & gate opener, lights, water pump and heaters up to 2000FT far away through the receiver.(It’s theoretical range, it will be decreased under real work environment.)
The waterproof design of the receiver makes it can be installed outdoor directly without extra waterproof cover.
It’s easy to be wired to the opener with the pre-wired 3.3 feet cord.
The 2-channel design makes it can control up to 2 separate garage door & gate openers, lights, water pumps and heaters.
2.Technical specifications:
Operating voltage: 9-24VDC/AC
Operating current: <>
Frequency: 315MHz
Channel: Dual Channel
Operating range: Maximum 2000 ft. (600M)
Output: Relay SPDT
Working Mode: Toggle (Inching)
Battery of the remote control: 9V 6F22
3.Contents:
1 x Receiver;
1 x Remote ;
1 x User Manual;
1 Set of Installation Accessories.
5. ACDelco 15016745 GM Original Equipment Multi-Purpose Relay
Description
An ACDelco GM Original Equipment Multi-Purpose Relay is a GM-recommended replacement for your vehicle’s original component. It controls a variety of different systems within your vehicle. This original equipment multi-purpose relay has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
6. Mini RF 2 Channel Relay Wireless Remote Control Learning Micro Switch, Long Range 433Mhz Transmitter with Receiver DC 3.7V to 12V
Feature
- 【Working Voltage】: DC3.7V-DC12V；Wide Range Working Voltage DC3.7V 4.5V 5V 6V 9V 12V . Max Load: 2A. Each relay 1A (have better Load less than 700ma)
- 【Excellent Advantage】mini size,Ultra low power,High sensitive response, Wireless control. Resist Interference：It adopts non-directional wireless encoding technology, allowing independent control without mutual interference.
- 【EXCELLENT RANGE and SIGNAL】:Independent coding, many sets will be not interference of each other
- This RF remote control adopts RF technology, stable signal. The signal can pass through the wall, floor and door, stably control the receiver from anywhere within a reliable distance. The range of use is up to 200 meters to 1000 meters (600 ft — 3280 ft) with no obstacle.
- 【WIDELY USED】 : wide range of applications from simple domestic remote control to autonomous control , Used for on-off control circuit, Wire and wire connection, remote controller, wireless controller, battery power switch,buzzer, trumpet, circuit board etc.
- 【3 Different Working Mode】we send Toggle mode default. You can switch to 4 different modes as needed，Momentary / Toggle / Latched . If you encounter any problems in use, please send us an email, we will be happy to serve you, thank you very much
Description
Product Description
Max Load: 2A . Each relay 1A (have better Load less than 700ma)
Quiescent Current: 7ma
Relay Working Current:1 Relay ON 50ma , 2 Relay on 100ma
Size: 0.87inch*0.81inch*0.44inch
Working Mode: Momentary, Toggle, Latched, adjustable
Encoding Type: Learning Dot to add Transmitter
Input DC3.7V-DC12V Output 0V Switching Value
Working Way ：
Momentary: press one button is working /ON. loosen your finger on the same button is stop/OFF
Toggle : press one button for one time is working/ON .press the same button again is stop/OFF .
Latched : press button A is working/ON ,press button B is stop/OFF
Learn method ： Input 12V for the Receiver , press the Learning Dot, The receiver Led indicator ON. Press remote button A 1 time, Led indicator flash for 2 times , Then Press remote button B 1 time , Led indicator flash for 2 times again , it mean learning successfully
Clearing method: press the Learning Button . Until the receiver Led indicator flash for 3 times, it mean Clearing Code
How to change working way :
Momentary: press learn button 1 time ,Press remote button A 1 time, Led indicator flash for 2 times , Then Press remote button B 1 time , Led indicator flash for 2 times again , it mean learning successfully
Latched :press learn button 3 time ,Press remote button A 1 time, Led indicator flash for 2 times , Then Press remote button B 1 time , Led indicator flash for 2 times again , it mean learning successfully
Toggle : press learn button 2 time ,Press remote button A 1 time, Led indicator flash for 2 times , Then Press remote button B 1 time , Led indicator flash for 2 times again , it mean learning successfully
Package Include:
1 x Receiver
1 x Transmitter
7. Power Trim Tilt Relay for Outboard Motor American Zettler (2-Pack)
Feature
- (2pcs) Power Trim Tilt Relay for Outboard Motor American Zettler
- Brand: American Zettler
- Color:Black Dimension: 37*47*36mm(L*W*H)
- Material:Plastic+Metal stent Power:12V Current:40A Fits many outboard power tilt and trim units.
- Replace: 882751A1, 3854138, 73040, 828151,828151A1, 882751A2, HELLA 87414BP&B VF4-55F11 BOSCH 0332204174,TYCO 8-1393305-6
Description
Replace: 882751A1, 3854138, 73040, 828151,828151A1, 882751A2, HELLA 87414BP&B VF4-55F11 BOSCH 0332204174,TYCO 8-1393305-6
Cures most trim issues including trim cutting out from time to time, trim only working in one direction, or trim not working at all
Its recommended that you change both trim relays out at the same time, sometimes one bad relay will make the entire trim not work.
Easy 5 minute fix, Trim relays are usually located on starboard side of motor, you may have to unscrew some wires to get to them.
If your old relays have the “Hangtag Connectors” with the rubber spacers, be sure to keep those and put those on the new relays to ensure an easy fit. If you already threw them away, no worries, you just may need to use a spacer to ensure a snug fit when your screwing the relays back in place.
8. 12V Wireless Remote Control Relay Switch, Secure 1-Channel 433MHz Long Range Remote RF Relay Toggle Switch (One Receiver with One Transmitter) 3.7V 4.5V 5V 6V 7.4V 9V 12V
Feature
- ✔️【EASY and SAFE】The wireless remote control switch is easy to use and safety, we send Toggle mode default. the Working Voltage: DC3.5V-DC12V
- Max Load: 1A (have better Load less than 700ma)
- ✔️【Range of SIGNAL 】This RF remote control adopts RF technology, stable signal. Signal of the wireless RF switch can pass through walls, floors and doors, steadily control receiver from any place within a reliable distance, Max range is up to 164ft/50m with no obstacle.
- ✔️【Advantage】mini size, Low power consumption, flexible operation,high sensitivity, Wireless control. Resist Interference：The RF remote control adopts non-directional wireless encoding technology, allowing independent control without mutual interference.
- ✔️【WIDELY USE】wide range of applications from simple domestic remote control to autonomous control such as battery power switch, remote controller, wireless controller, DIY, Car, Storage battery，relay, circuit board etc.
- ✔️【Great Service】Your satisfaction is our highest priority, and we aim to provide you with the best after-sale support & services , and If you are not satisfied with it – send it back for a full refund ! If you encounter any problems in use, please send us an email, we will be happy to serve you, thank you very much
Description
This is a simple, safe and convenient, widely used, compact and flexible remote control switch.
*Working Voltage: DC3.5V-DC12V
*Wide Range Working Voltage DC3.7V 4.5V 5V 6V 9V 12V
*it can work with DC Power / Rechargeable lithium battery / Rechargeable
*Max Load: 1A (have better Load less than 700ma)
*Quiescent Current: 5ma
*Relay Working Current: 20-30ma
*Size: 25*11*8mm
.Working Mode: Momentary. Toggle .Latched adjustable(Notice: we send Toggle mode default . If you want to change the working mode, please use solder tool to operate)
How to change working mode :
★Momentary : Connect the right side 2 points (M)
★Latched : Connect the left side 2 points (L)
.
How to change working mode :
★Momentary : Connect the right side 2 points (M)with a soldering iron
★Latched : Connect the left side 2 points with a soldering iron (L)
.Encoding Type: Learning point to add extra Transmitter
Learning method：Input 3.5V – 12V for the Receiver ,Connect the learning point with tweezers, the receiver LED indicator lights up or flashes, Press remote button 1 time, Led indicator flash for 3 times , Then Press remote button 1 time again , Led indicator flash for 3 times again , it mean learning successfully
.Normally Open Port (NO) Common Port (COM) Normally Close Port (NC) Input DC3.5V-DC12V Output 0V Switching Value
1.Momentary—press one button is working /ON. loosen your finger on the same button is stop/OFF .one channel switch need one buttons remote control
2.Toggle—press one button for one time is working/ON .press the same button again is stop/OFF .(one channel switch need one buttons remote control
3.Latched—press one button is working/ON ,press another button is stop/OFF . ( one channel switchneed 2 buttons remote control )
Package Include:
1 x Receiver(without cover)
1 x Transmitter(with battery)
9. 12V Remote Control Switch Secure 1-Channel 433Mhz Remote Transmitter and Receiver, Wireless Remote Relay RF Contact Switch, Long Range Remote Control for Widely Use (Latching Mode) DC3.7v-12v
Feature
- 【Low Power Consumption 】Low power consumption is the most prominent features of this remote control switch. The remote relay switch adopts RF technology, stable signal. Resist Interference：It adopts non-directional wireless encoding technology, allowing independent control without mutual interference.
- 【Easy to Install and Use】Wireless control, easy to install and use,We have made transmitter and receiver working together and test it before ship it, when you get it don’t need to do anything , just install it. the Working Voltage: DC3.7V-DC12V
- Max Load: 1A (have better Load less than 700ma)
- 【Working modes】we send Latched mode default (that is, Press the Transmitter button A, the receiver relay is ON
- Press the button B, the receiver relay is OFF ). You can switch to 4 different modes as needed，Momentary / Toggle / Latched /Delay time.
- 【Widely Used】 : wide range of applications from simple domestic remote control to autonomous control such as battery power switch, remote controller, wireless controller,DIY, relay, buzzer, trumpet, circuit board etc.
- 【Max Range of the Signal 】You can use the transmitter (remote control) to turn the receiver on/off at any distance from a reliable location
- 433MHz RF is available, RF signals can pass through wallsfloors and doors，steadily control receiver from any place within a reliable distance. the max range is within 164ft/50m with no obstacle
Description
Product Description
Working Voltage:DC3.7V-DC12V
Wide Range Working Voltage DC3.7V 4.5V 5V 6V 9V 12V
Max Load:1A (have better Load less than 700ma)
Standby current 0.2mA
Relay Working Current: 20-30ma
Size:0.9inch*0.43inch*0.31inch
Working Mode: Momentary/ Toggle / Delay time adjustable
Encoding Type:Learning Dot to add Transmitter
Normally Open Port (NO) Common Port (COM)
Input DC3.7V-DC12V Output 0V Switching Value
Working way
Momentary—Press the Transmitter button, the receiver relay is ON, release the button ; the receiver relay is OFF
Latched—Press the button A for 1 time , the receiver relay is ON, press the button B again, the receiver relay is OFF
Toggle—Press the button for 1 time , the receiver relay is ON, press the button again, the receiver relay is OFF
Delay time—Press the button, the corresponding relay actuates and keeps working until the time out.(5S)
Learning Code:Input 12V for the Receiver,Connect the Learning point,The receiver Led indicator ON. Press remote button A 1 time, Led indicator flash for 1 times,Then Press remote button B 1 time , Led indicator flash for 1 times again, it mean learning successfully
Latched: Connect the Learning point, Until the receiver Led indicator flash for 3 times,it mean Change successfully.
Toggle : Connect the Learning point . Until the receiver Led indicator flash for 1 times, it mean Change successfully.
Momentary: Connect the Learning point.Until the receiver Led indicator flash for 2 times,it mean Change successfully.
Delay time : Connect the Learning point . Until the receiver Led indicator flash for 4 times, it mean Change successfully.
Package Include:
1 x Receiver
1 x Transmitter
10. Pair Of Power Trim Tilt Relay for Mercury Outboard Motor American Zettler AZ973-1C-12DC4
Feature
- Power Trim Tilt Relay for Outboard Motor American Zettler
- Brand: American Zettler
- Color:Black Dimension: 37*47*36mm(L*W*H)
- Material:Plastic+Metal stent Power:12V Current:40A Fits many outboard power tilt and trim units.
- Replace: 882751A1, 3854138, 73040, 828151,828151A1, 882751A2, HELLA 87414BP&B VF4-55F11 BOSCH 0332204174,TYCO 8-1393305-6
Description
Replace: 882751A1, 3854138, 73040, 828151,828151A1, 882751A2, HELLA 87414BP&B VF4-55F11 BOSCH 0332204174,TYCO 8-1393305-6
Cures most trim issues including trim cutting out from time to time, trim only working in one direction, or trim not working at all
Its recommended that you change both trim relays out at the same time, sometimes one bad relay will make the entire trim not work.
Easy 5 minute fix, Trim relays are usually located on starboard side of motor, you may have to unscrew some wires to get to them.
If your old relays have the “Hangtag Connectors” with the rubber spacers, be sure to keep those and put those on the new relays to ensure an easy fit. If you already threw them away, no worries, you just may need to use a spacer to ensure a snug fit when your screwing the relays back in place.
Conclusion
By our suggestions above, we hope that you can found 9V Long Range Relay for you.Please don’t forget to share your experience by comment in this post. Thank you!
