Finding your suitable readers for dewalt miter gauge replacement is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for dewalt miter gauge replacement including detail information and customer reviews. Let’s find out which is your favorite one.
881 reviews analysed
1. DeWalt Replacement DW745 Table Saw Miter Gauge # 5140032-78
Description
DeWalt 5140032-78 Replacement Table Saw Miter Gauge
This part is compatible with the following machines:
DeWALTDW745 Type 1 Table SawDW745 Type 1 Table SawDW745 Type 2 Table SawDW745 Type 2 Table SawDWE7480 (Type 1) 10″ Compact Job Site Table SawDWE7480 (Type 1) 10″ Compact Job Site Table SawDW745 (Type 3) 10″ Table SawDW745 (Type 3) 10″ Table Saw
2. Precision Miter Gauge with a Standard Slot (3/4” x 3/8”) Steel Bar Equipped with Adjustable Spring Loaded Plungers and Removable Retaining Disc
Feature
- If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. You may also know that the miter gauge that came with your saw is not terribly accurate or durable. Not to mention that the fit in the miter slot may not be all that great as well. The Fulton Miter Gauge is a high quality, well thought out and economical solution to your table saw cross cutting needs.
- The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.
- To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place by tightening the post knob handle. The aluminum head has two ¼” x ½” slots milled into it for mounting a miter fence if so desired. The slots are approximately 1-1/8” from the base of the miter gauge head.
- The head is mounted to a solid steel miter bar that measure 18” in length and is .353” thick by .730” wide. Standard miter slots (not Craftsman or Sears branded items) are 3/4” x 3/8” with a 1/8” “T” slot (with slight variances from brand to brand) running the length on the bottom of the slot.
- The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through. If your saw does not have a “T” slot, you can remove the disc. The steel miter bar is also equipped with spring loaded, adjustable plungers on the side of the bar. The plungers can be adjusted with the provide hex key wrench in or out to provide you with the ideal fit.
3. DEWALT 33007898 2 Wire 16 Gauge Power Cord, 10′
Description
This is an O.E.M. authorized part. Fits various DEWALT models. OEM Part Number 33007898. The product is manufactured in United States. .
4. POWERTEC 71005 Deluxe Table Saw Miter Gauge
Description
The POWERTEC 71005 Deluxe table saw miter gauge features a generously designed grip, for comfort and strength, giving the user ease and control and designed for superior accuracy. The gauge made to fit miter grooves measuring 3/8 by 3/4 inch, includes an adjustable guide bar for easy fit into tight tolerance miter slots. The miter gauge has positive stops at all common angles. A washer is included to prevent tipping when the gague is Extended over work surface edges.
5. OEM N272579 Replacement Table Saw Miter Gauge Assembly DWE7490
Description
Compatible with: DWE7490X Type 1, DWE7490X Type 2, DWE7491RS Type 1, DWE7491RS Type 2, DWE7499GD Type 1, DWE7499GD Type 2
6. DEWALT 33007298 18 Gauge 2 Wire Power Cord, 8′
Description
This is an O.E.M. authorized part. Fits various DEWALT models. OEM Part Number 33007298. The product is manufactured in United States. .
7. SKIL 3410 Table Saw Replacement Miter Gauge Assembly # 2610011708
Description
Includes (1) 2610011708 Miter Gauge. New, Bulk Packed. Genuine OEM replacement part. Consult owners manual for proper part number identification and proper installation. This miter gauge is only used with Skil 3410 (F012341005) Table Saw only.
8. Kreg KMS7102 Table Saw Precision Miter Gauge System
Feature
- Factory Calibration. Guaranteed out of the box to .003 accuracy of 6-inches
- Gauge head is CNC machine perfectly square to the bar and table ( no stampings)
- Vernier scale allows fast, 1/10th-degree angle adjustments. Our extremely straight 24 inch (610mm) anodized-aluminum bar is 3/8 inch(9.5mm) thick by 3/4 inch(19mm) wide and features five bar adjusters that you can use to eliminate “play” in the miter slot with the turn of a screwdriver
- Microadjuster allows additional angle adjustment to 1/100th degree
- Positive stops at 0, 10, 22-1/2, 30 and 45-degrees
- limited lifetime warranty
Description
Product Description
Cut perfect miters consistently with Kreg’s Precision Miter Gauge System. A number of unique features makes this one of the most precise miter gauges on the market today. Factory calibrated accuracy starts with a gauge head that is machined on a computerized milling machine for absolute precision. An easy-to-read Vernier scale enables precise angle adjustments up to 1/10th of a degree. Five patented bar adjusters take up the play in the miter slot for a perfect fit. A 24″ fence section with patented Swing Stop and self-adhesive measuring tape is included. Factory calibrated.
Amazon.com
Weve found that even on high-end saws, the miter gauge is sometimes not the best it could be a situation easily resolved by the folks at Kreg. You probably know them for their ingenious pocket hole system, but this miter gauge is worthy of fame in its own right.
Its not like any weve seen before, with a handful of features that work together to give you the ability to set an angle cut accurately to 1/10th of a degree and beyond that, to adjust to 1/100th of a degree (hats off to you if youre that precise!)
Setup takes a little bit of time and patience, but the results are well worth it. Its got a super accurate length scale with a magnifying lens cursor, similar to those on good table saws, and the curved flip stop can be used with the fence as is, or you and a pair of pliers can modify it easily for permanent use with a sacrificial fence. This clever curved design lets you slide your stock right under it. The slot bar has five patented nylon screws along its length that let you custom fit it to your table saw slot, completely eliminating any play.
Its got the positive stops you expect, at 0, 22.5, 30 and 45 degrees, and theyre marked by preset holes that accept a tapered brass pin, which locks in the angle with absolute precision. The gauge is marked with diamonds every five degrees for great legibility, too. But what sets this gauge apart from the pack is its Vernier scale, allowing you to set any angle in tenth-of-a-degree increments. Unless you have a degree in mathematics, dont try to understand the process its confusing and non-intuitive. Instead, just follow the step-by-step directions, and youll get absolute accuracy every time.
And when Kreg calls something a “micro-adjustment” mechanism, they really mean micro. With this miter gauge, you can actually increase your angle by 1/100th of a degree by turning a nylon screw that increases the space between the fence and the gauge. For each .001 inch you put between the fence and gauge, you increase your angle by 1/100th of a degree.
Kregs really hit the accuracy bullseye with this miter gauge, and adding it to even a so-so saw will give you fantastic results. Take your time with setup and follow the directions for the Vernier scale, and youll be as taken with it as we are. — Kris Jensen-Van Heste
9. DELTA Deluxe Miter Gauge
Feature
- This part is compatible with models including
- 34-710,34-440 (90C12580 THRU 95H98459),34-440 (88J00000),34-440 (95H98460 & HIGHER),34-440 (SN88J00001 THRU 90C12579)
- This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including
- 34-895,422-04-004-0001,50-864,34-928
- Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Delta
- This miter gauge assembly (part number 34-929) is for table saws
- The assembly may include multiple parts
- refer to your parts diagram for a complete list of parts included
Description
Genuine Original Equipment Manufacturer (OEM) parts! This miter gauge assembly (part number 34-929) is for table saws. Miter gauge assembly 34-929 guides the work piece as it’s being cut. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included. Follow the instructions in the owner’s manual when installing this part. For Delta.
10. Dewalt 330077-98 Power Tool Power Cord Genuine Original Equipment Manufacturer (OEM) Part
Feature
- This part is compatible with models including
- 900277130,DW293 TYPE1,DW260K TYPE1,DW260K TYPE2,DW260K TYPE3,DW260K TYPE4,6509 TYPE 808B,900271320,DW257TY1,DW294 TYPE1,DW290,DW269 TYPE 4,DW269 TYPE 1,DW269 TYPE 3,DW269 TYPE 2,DW296 TYPE 2,DW505 TYPE2,DW255,DW505 TYPE1,900289970
- This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including
- 22-64-0408
- Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Dewalt,Craftsman
- This power cord (part number 330077-98) is for power tools
- Wear work gloves to protect your hands
Description
Genuine Original Equipment Manufacturer (OEM) parts! This power cord (part number 330077-98) is for power tools. Unplug the power tool before installing this part. Wear work gloves to protect your hands. For Dewalt & Craftsman.
Conclusion
By our suggestions above, we hope that you can found Dewalt Miter Gauge Replacement for you.Please don’t forget to share your experience by comment in this post. Thank you!
