Top 9 Dishwasher Water Pump Booster

Specifications:
1.Power: 120W
2.Max Head:49.2ft(15m)
3.Max Flow: 396GPH (25L/min)
4.Current: 1.1A
5.Capacitance: 15uf
6.Volt/Freq:110-120V/60Hz
7.Connection size on pump body: 3/4 inch
8.Size of union and flow switch: 3/4 inch to 1/2 inch

Description:
This booster pump absolutely solves the lit fire properly of shower owing to the lower pressure and unreliable pressure. When the tap water is of low pressure, the pump can boost pressure. It can also boost pressure for solar water heaters, boost pressure and circulate water for industrial equipment, and increase oxygen for rearing ponds and fish tanks.GR hot-water pumps boost pressure and circulate hot water for boilers besides above using. GZ best feature is that it can suck tap water from one or two floor below directly. So it completely solves the problem that the higher floors do not have water while the lower floors have.

Application & Characteristics:
1.There may be a problem of failing to retrofire the gas heater caused by the low pressure of water supply, you can solve this problem easily by fitting a home booster. Flexible tube fitting is viable.
2.The Home booster can increase the pressure of household water tank and keep a steady pressure.
3.The top floor of the apartment has problems of low water pressure, low water flux and failure to retrofire the gas heater, which is caused by the low height of water tank. The home booster can solve these problem.
4.It can supply oxygen, and keep the water clean.
5.The pump can be used as a circulator for some industry equipment, such as argon arc welding machine, laser apparatus, injection molding machine, foodstuff machinery, medical treatment equipment and so on, and also can supply water for small boilers.

Package included:
1).1*Booster pump body
2).1*Water flow switch
3).1*All brass fitting
4).4*Tri-clovers
5).1*White tape

3/4 HP, 115/230 V, 60 Hz stainless steel shallow well jet pump system on a stainless steel 7 gal pressure tank. Eliminate rust and drink cleaner water with a stainless steel pump. Recommended for residential use in homes, cottages or farms. Maximum vertical lift of 25′. Built-in ejector. High performance Norrys impeller. Totally enclosed fan cooled motor powered by a full-time run capacitor to eliminate starting wear vs regular motors. Thermal and overload protection. Large stainless steel corrosion-resistant body, easy to prime. Built for an intermittent or a continuous use. Maximum pressure of 65 PSI, comes installed with pressure switch factory set to 30/50 PSI. 1″ NPT suction and discharge. 0 – 100 PSI pressure gauge. Factory assembled for quick and easy installation. Capacity at 30 PSI: 897 US GPH/5’; 749 US GPH/10’; 638 US GPH/15’; 555 US GPH/20’; 472 US GPH/25’.

Shurflo’s 115 volt, 3.3 gallons per minute pump @ 45 psi

Scala2 is a fully integrated water booster pump providing perfect water pressure in all taps at all times – even with multiple taps and Showers running at the same time. It packs pump, motor, tank, sensor, drive and non-return valve into one compact unit. And with its intelligent pump control, Scala2 automatically adjusts performance to both inlet pressure and water consumption in the home. Thanks to a water-cooled motor, Scala2 even offers one of the lowest noise levels of any booster on the market. Scala2 features a built-in sensor, which constantly measures the discharge pressure. If the pressure drops below the desired level, Scala2 boosts its operation immediately to compensate for the loss of pressure. We call it intelligent pump control and the result is perfect water pressure.

Stiebel Eltron SHC series mini-tank electric water heater is ideal for office buildings, stores, malls, warehouses, food trucks, restaurants, gas stations, schools, hotels/motels, commercial, industrial and institutional. residential: bathroom sinks, kitchen sinks, rvs, cabins/cottages, low flow showers and laundry areas. An SHC mini-tank frees up precious space while providing plenty of hot water for hand washing or kitchen applications. Plumbed with cold water and used as a stand-alone supply of hot water, or plumbed with hot water from a remote tank to minimize delays, an SHC always delivers hot water when needed. By put – ting hot water right where it is used, pipe runs are minimized and water and energy use reduced. The smaller tank coupled with superb insulation reduces stand-by losses especially when compared with larger tank-type water heaters. With its flat back and included bracket an SHC easily mounts right under or near the sink. Once filled with water it simply plugs into a 120 V outlet. With only an 11 amp current draw, no special wiring is required. Lightweight and compact, the SHC saves space, quickly provides hot water right where it is needed. Certified to ANSI/UL Std. 174 Conforms to CAN/CSA Std. 22.2 No. 110. Tested and certified by WQA against NSF/ANSI 372 for lead free compliance. ISO 9001 certified. Technical Specification: Phase – 60/50 Hz: single; Voltage: 120 V; Wattage: 1300 W; Amperage: 11.3 A; Nominal water volume: 6.0 gal / 22.7 l; Weight empty: 26.5 lb / 12.0 kg; Height (includes PandT valve): 20-1/2″ / 520 mm; Width: 15-1/8″ / 385 mm; Depth: 15″ / 380 mm; Maximum operating pressure: 150 psi / 10 bar; Maximum adjustable temperature: 140 degrees F / 60 degrees C; Recovery time: 45 minutes; Standby energy loss @ 131°F / 55°C: 0.43 kWh / day; Water connections: black steel -1/2″ NPT.

This is a demand delivery pump used normally after an RO storage tank

Grundfos website states that the”SCALA2 is a fully integrated water booster pump providing perfect water pressure in all taps at all times – even with multiple taps and showers running at the same time. It packs pump, motor, tank, sensor, drive and non-return valve into one compact unit. And with its intelligent pump control, SCALA2 automatically adjusts performance to both inlet pressure and water consumption in the home. Thanks to a water-cooled motor, SCALA2 even offers one of the lowest noise levels of any booster on the market.” SCALA2 features a built-in sensor, which constantly measures the output pressure. If the pressure drops below the desired level, SCALA2 boosts its operation immediately to compensate for the loss of pressure. Grundfos calls it intelligent pump control and the result is exact water pressure.

the cut off pressure on the pump is set at 60 psi at the factory, but this pressure can be adjusted using an Allen key. On the pump head there is a hex screw, you can use the Allen key to turn clockwise to increase pressure. 1/2 turns is +10 psi the inlet and outlet are 3/8″ JG quick connect fitting. It is for 3/8″ Outside diameter tubing. This pump is for water transfer of 1 to 1.7 gallon per minute applications, this is not for refrigerator line. For residential refrigerator or residential ice maker, use different model like 5851 0.7 gpm and add an Aquatec accumulator tank / pulsation dampener model ACT820-JG