We spent many hours on research to finding flotec 3/4 hp shallow well pump, reading product features, product specifications for this guide. For those of you who wish to the best flotec 3/4 hp shallow well pump, you should not miss this article. flotec 3/4 hp shallow well pump coming in a variety of types but also different price range. The following is the top 10 flotec 3/4 hp shallow well pump by our suggestions
613 reviews analysed
1. Flotec Thermoplastic Shallow Well Jet Pump – 1 1/4in. Suction Port, 1in. Discharge Port, 720 GPH, 3/4 HP, Model# FP4022
Feature
- Capacities up to 12 Gallons/Minute at 40 PSI (Average Household use 6-10 GPM) Fiberglass-Reinforced Thermoplastic Pump Housing for Highest Corrosion Resistance Pressure Switch Preset to 30-50 PSI Pressure Setting Ready to Install, Heavy-Duty 230 Volt Motor (See Manual for 115 Volt Conversion) Self-Priming after Pump Housing is Initially Filled (Check or Foot Valve Required) Serviceable Unit Superior Performance at 25′ Depth to Water or Less TC2104 Pressure Gauge Recommended
Description
This Flotec Thermoplastic Shallow Well Jet Pump provides good pressure pumping, perfect for shallow wells less than 25-ft. deep. Thermoplastic construction gives high corrosion resistance. Comes with prewired 30/50 pressure switch. Amps 12.2/6.1, Flow GPH 720, HP 3/4, Max. PSI 78, Max. Suction Lift ft. 25, Max. Total Head ft. 181, Discharge Port in. 1, Self-Priming Yes, after initial prime, Suction Port in. 1 1/4, Thermal Overload Protection Yes, Volts 230/115, Pump Housing Thermoplastic, Dimensions L x W x H in. 22 13/16 x 11 1/16 x 10 1/2. Perfect for shallow wells less than 25-ft. deep Thermoplastic construction gives high corrosion resistance Comes with prewired 30/50 pressure switch Heavy-duty dual-voltage motor Self-priming after pump housing is initially filled
2. Acquaer SJC075 3/4 HP Dual-Voltage Cast Iron Shallow Well Jet Pump, Black
Description
Acquaer SJC075 is a 3/4 hp shallow well jet pump is designed for wells up to 25 ft. Deep. The pump can run at 115 or 230 Volts with the quick change voltage selection switch, and the pressure switch is set to 30 psi on and 50 psi off for high-pressure delivery.
3. BURCAM 506221P 3/4 HP Noryl Shallow Well Jet Pump
Description
3/4 horsepower, 115/230 Volts, noryl shallow well jet pump. Bearing to bearing stainless steel motor shaft. 1 1/4 inch suction and 1 inch discharge. Full time run capacitor to eliminate staring wear. Stainless steel mechanical seal. Designed for a maximum vertical suction lift of 25 feet. Pumps up to 850 gph. Pump capacity: 5 feet/850 gph, 10 feet/760 gph, 15 feet/670 gph, 20 feet/480 gph, 25 feet/425 gph.
4. Flotec Fp4032 Thermoplastic Shallow Well Jet Pump, 1 Hp
Description
Shallow well jet pump with built-in pressure switch. Superior performance at depths to water of 25′ or less. 1/2 HP pumps up to 8 GPM. 3/4 HP pumps up to 12 GPM. 1 HP pumps up to 18 GPM. Fiberglass-reinforced thermoplastic pump housing for the highest corrosion-resistance. Heavy-duty dual-voltage motor – 1/2 HP preset at 115V; 3/4 HP and 1 HP preset at 230V. Self-priming after pump housing is initially filled. CSA certified.
5. Flotec FP5172 Pump Sprinkler 1.5Hp
Feature
- Self-priming, corrosion-resistant, high-capacity sprinkler pump
- Capable of operating up to 30 sprinkler heads
- delivers 115/230 motor voltage and offers dual voltage capability
- Constructed of rugged, heavy-duty fiberglass-reinforced thermoplastic.Maximum water temperature: 140 °F (60 °C)
- Self-priming design permits use on automatic sprinkler systems as well as de-watering and water transfer. Maximum pressure : 47 psi
- Measures 6.0-by-8.0-by-9.0 inches (WxHxD)
- weighs 41.5 pounds
- 1-year warranty
- Self-priming, corrosion-resistant, high-capacity sprinkler pump
- Capable of operating up to 30 sprinkler heads
- delivers 115/230 motor voltage and offers dual voltage capability
- Constructed of rugged, heavy-duty fiberglass-reinforced thermoplastic
- Self-priming design permits use on automatic sprinkler systems as well as de-watering and water transfer
- Measures 6.0-by-8.0-by-9.0 inches (WxHxD)
- weighs 41.5 pounds
6. ECO-FLO Products EFSUB7-123 Submersible Deep Water Well Pump, 3 Wire, 230v, 4 Inch, 3/4 HP, 12 GPM
Feature
- Corrosion resistant all stainless steel exterior construction
- With 3-wire models, all controls are in the control box, mounted at the top of the well
- Contains many stainless steel and corrosion-resistant components
- 3/4 Horse Power motor – cast iron discharge connection
- Built-in check valve
- Download the User Manual under the Technical Specification section of this page for safety, installation, troubleshooting, and warranty information
Description
Product Description
ECO-FLO Products exceed the competition in flow and head performance. Test laboratory and ISO 9000 facility account for quality built pumps that are all CSA approved. The eco-flo commitment is to produce pumps for the long term at the best value.
From the Manufacturer
ECO-FLO Products exceed the competition in flow and head performance. Test laboratory and ISO 9000 facility account for quality built pumps that are all CSA approved. The ECO-FLO committment is to produce pumps for the long term at the best value.
7. 1/2 HP Shallow Well Jet Pump by Lanchez Stainless Steel Water Pump Transfer Removal Irrigation Pumps for Clean Water 960GPH
Feature
- 1/2 HP
- Flow rate to 960 gallons per hour
- Corrosion-resistant stainless steel construction extends product life and is easy to clean.
- Lower noise and emergy-efficient motor with thermal overload protection.
- Designed for continuous duty use in watering application. Suitable use in garden, lawn, farm and rural house.
- UL certificated. TIP: Please add some water to the outlet before operation.
8. Flotec FP4012-10 1/2 HP Shallow Well Pump Jet
Feature
- Built-in shallow well pump jet ideal for wells with pumping levels of 25-Feet or less
- Offers superior performance at capacities to 10 GPM at 40 PSI
- Fiberglass-reinforced thermoplastic provides incredible corrosion and sandy water resistance
- dust-proof cover protects all electrical components from dust and insects
- Includes stainless steel shaft, heavy duty ball bearings, balanced rotor, mechanical shaft seal and insulated motor windings
- Measures 6.0-by-7.0-by-11-Inch (width by height by depth)
- weighs 26 Pound
Description
Product Description
Shallow well jet pump with built-in pressure switch. Superior performance at depths to water of 25′ or less. 1/2 HP pumps up to 8 GPM. 3/4 HP pumps up to 12 GPM. 1 HP pumps up to 18 GPM. Fiberglass-reinforced thermoplastic pump housing for the highest corrosion-resistance. Heavy-duty dual-voltage motor – 1/2 HP preset at 115V; 3/4 HP and 1 HP preset at 230V. Self-priming after pump housing is initially filled. CSA certified.
Amazon.com
This 1/2 HP, built-in shallow well pump jet from Flotec is ideal for wells with pumping levels of 25 feet or less. Featuring a corrosion-resistant nozzle and venturi, this model offers superior performance at capacities to 10 GPM at 40 PSI. It works by self-priming after the pump housing is initially filled with water. The fiberglass-reinforced thermoplastic construction provides incredible corrosion resistance, as well as resistance to sandy water. The dust-proof cover protects all electrical components from dust and insects, thus resulting in a longer-lasting motor. With a stainless steel shaft, heavy duty ball bearings, balanced rotor, mechanical shaft seal and insulated motor windings, the pump’s powerful motor delivers non-stop operation for years to come.
9. Acquaer SJC050 1/2 HP Dual-Voltage Cast Iron Shallow Well Jet Pump, Black
Description
Acquaer SJC050 is a 1/2 hp shallow well jet pump is designed for wells up to 25 ft. Deep. The pump can run at 115 or 230 Volts with the quick change voltage selection switch, and the pressure switch is set to 30 psi on and 50 psi off for high-pressure delivery.
10. BURCAM 506547SS 3/4 HP Stainless Steel Shallow Well Jet Pump System
Description
3/4 HP, 115/230 V, 60 Hz stainless steel shallow well jet pump system on a stainless steel 7 gal pressure tank. Eliminate rust and drink cleaner water with a stainless steel pump. Recommended for residential use in homes, cottages or farms. Maximum vertical lift of 25′. Built-in ejector. High performance Norrys impeller. Totally enclosed fan cooled motor powered by a full-time run capacitor to eliminate starting wear vs regular motors. Thermal and overload protection. Large stainless steel corrosion-resistant body, easy to prime. Built for an intermittent or a continuous use. Maximum pressure of 65 PSI, comes installed with pressure switch factory set to 30/50 PSI. 1″ NPT suction and discharge. 0 – 100 PSI pressure gauge. Factory assembled for quick and easy installation. Capacity at 30 PSI: 897 US GPH/5’; 749 US GPH/10’; 638 US GPH/15’; 555 US GPH/20’; 472 US GPH/25’.
Conclusion
By our suggestions above, we hope that you can found Flotec 34 Hp Shallow Well Pump for you.Please don’t forget to share your experience by comment in this post. Thank you!
