The Best Frigidaire Mounting Kit Dishwasher

This is a Genuine Replacement Part,The Model Number and Name for The Following Item: Frigidaire (FRIGB) 154657901 Mounting Clip.

Product Description

This is a genuine replacement part. The model number and name for the following item is: Frigidaire 154844301 Motor Kit.

From the Manufacturer

This is a genuine replacement part. The model number and name for the following item is: Frigidaire 154844301 Motor Kit

Product Description

This is a genuine replacement part. The model number and name for the following item is: Bracket 154595901 Frigidaire bracket flange this a motor bracket for dishwasher.

From the Manufacturer

This is a genuine replacement part. The model number and name for the following item is: Bracket 154595901 Frigidaire bracket flange this a motor bracket for dishwasher

Part Number 5304442175 (AP3774457) replaces 154211201, 154211202, 154211303, 154293103, 154308102, 154308103, 154316303, 154361202, 154361203, 154434103, 154434105, 154434102, 1063307, AH979852, EA979852, PS979852.

Frigidaire L304458800 dishwasher granite countertop installation bracket kit genuine original equipment manufacturer (oem) part, granite

This is a genuine replacement part, the model number and name for the following item: Frigidaire (frigb) 154610501 mounting bracket.

1) Turn off power to dishwasher in breaker box (ABSOLUTELY CRITICAL TO AVOID SHOCK) and turn off water supply. 2) Pull dishwasher out from its place. 3) Remove upper screw from side of dishwasher. Align last hole of bracket on long flat part of bracket with screw hole. Reinsert & tighten removed screw or one of new provided screws. 4) Push dishwasher back into place. Open dishwasher door. Determine which bracket hole you will use. You want to use the farthest hole forward that still attaches to cabinet. If using holes on the smaller flat part of bracket, see 5A-6A. If you need to use back hole, see 5B-9B. 5A) If using front hole, leave bracket as is. If using 2nd hole, use 1 pair of pliers to hold bracket at the 2nd hole & 1 pair of pliers to break off front tab. Repeat. Push dishwasher back into place. 6A) Pre-drill screw holes to avoid splitting wood. Screw brackets into place using provided screws. DONE! 5B) If you cannot use either of front two holes on bracket, you will need to drill a hole in the tub. Use a sharpie to mark through back bracket hole on dishwasher. Repeat. Remove both brackets. 6B) Using 2 sets of pliers, break off both brackets before bend. 7B) Drill 3/8 inch hole through each side of plastic tub. Hold plastic tightly right below mark & use a drill slowly to ensure you have a nice clean hole without damaging the tub. Clean up both holes with razor blade until smooth. 8B) Put brackets back on, put dishwasher back into place. Pre-drill small holes into the cabinet wood, then screw in included screws on each side. 9B) Insert plastic plugs in each hole. Run dishwasher & check for leaks. If leaks are present, you may need to add rubber cement to plastic plugs to create a seal. This is a generic product manufactured & distributed by Impresa Products (TM). This is not a Frigidaire (TM) / Electrolux (TM) OEM product. Any use of Frigidaire (TM) or Electrolux (TM) brand names, models, etc. are made solely to describe & illustrate compatibility.