Finding your suitable readers for frs shark fin antenna is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for frs shark fin antenna including detail information and customer reviews. Let’s find out which is your favorite one.
679 reviews analysed
1. HOTRIMWORLD Carbon Fiber Auto Roof Shark Fin Antenna Cover Trim for Toyota 86 Scion FR-S GT86 2012-2019
Feature
- Fit For Toyota 86 GT86 Scion FR-S 2012-2019
- 1pcs, Please make sure this product is fit for your car,thank you !
- Material:Carbon Fiber. Colour: Same As Pictures .
- Type:Exterior Styling
- This product has double sided paste , The paste effect depends on paste conditions and the correct way of installation. Please see the installation manual.
Description
Fit For Toyota 86 GT86 Scion FR-S 2012-2019
① Clean the place where you need to paste and then wipe the water with towel or tissues. It area should not have oil, water, wax etc.
② Determine the installation location and then make comparison of the product and installation location. If the product doesn’t fit your vehicle, please contact us immediately and DO NOT INSTALL.
③ When tearing off the double-sided adhesive of cover trim, you can’t touch the double sided paste with your hand.
④ In order to achieve better effect, if the temperature is below 20 degrees, we suggest heating double sided adhesive with hair dryer or lighter .(Do not heat over 40 degrees).
⑤ Align position and then paste. The paste effect depends on paste conditions and correct installation.
⑥ 20-30 seconds or more when pasting and don’t dip the item into water within 48 hours.
2. Beat-Sonic FDA9-D4S Crystal Black Silica/Raven Functional Shark Fin Antenna
Feature
- Manufactured for 2013-2014 Scion/Subaru FR-S/BRZ
- 3M Die-cut double-sided tape used to easily secure shark fin antenna
- Installation requires no modification and easily reversible
- Compatible for AM/FM radio, HD radio and satellite radio signals (from OEM)
- Included in package: 1 pre-painted and color matched Shark Fin antenna base with helical antenna, 1 M5 screw for attachment of antenna to base, 1 alcohol wipe
Description
The Beat-Sonic Shark Fin Antenna is specially designed and manufactured to match the roof curve of your car, to ensure exact fitment. Lower profile and sportier compared to the other antenna models. Tested to provide the car with better driving stability at higher speeds. Directly replace it with your rear roof antenna. It’s pre-painted and color matched for an exact match using high quality OEM paint. Helical coil antenna to directly connect to antenna base using M5 screw. 3M double-sided tape used to easily secure shark fin antenna. Installation requires no modification and easily reversible. Compatible for AM/FM Radio, HD radio and satellite radio signals (from OEM). Patented design. Made in Japan.
3. Beat-Sonic FDA9-C7P Lightning Red/Firestorm Functional Shark Fin Antenna
Feature
- Manufactured for 2013-2014 Scion/Subaru FR-S/BRZ
- 3M Die-cut double-sided tape used to easily secure shark fin antenna
- Installation requires no modification and easily reversible
- Compatible for AM/FM radio, HD radio and satellite radio signals (from OEM)
- Included in package: 1 pre-painted and color matched Shark Fin antenna base with helical antenna, 1 M5 screw for attachment of antenna to base, 1 alcohol wipe
Description
The Beat-Sonic Shark Fin Antenna is specially designed and manufactured to match the roof curve of your car, to ensure exact fitment. Lower profile and sportier compared to the other antenna models. Tested to provide the car with better driving stability at higher speeds. Directly replace it with your rear roof antenna. It’s pre-painted and color matched for an exact match using high quality OEM paint. Helical coil antenna to directly connect to antenna base using M5 screw. 3M double-sided tape used to easily secure shark fin antenna. Installation requires no modification and easily reversible. Compatible for AM/FM Radio, HD radio and satellite radio signals (from OEM). Patented design. Made in Japan.
4. Beat-Sonic FDA9-37J Satin White Pearl/Whiteout Functional Shark Fin Antenna
Feature
- Manufactured for 2013-2014 Scion/Subaru FR-S/BRZ
- 3M Die-cut double-sided tape used to easily secure shark fin antenna
- Installation requires no modification and easily reversible
- Compatible for AM/FM radio, HD radio and satellite radio signals (from OEM)
- Included in package: 1 pre-painted and color matched Shark Fin antenna base with helical antenna, 1 M5 screw for attachment of antenna to base, 1 alcohol wipe
Description
The Beat-Sonic Shark Fin Antenna is specially designed and manufactured to match the roof curve of your car, to ensure exact fitment. Lower profile and sportier compared to the other antenna models. Tested to provide the car with better driving stability at higher speeds. Directly replace it with your rear roof antenna. It’s pre-painted and color matched for an exact match using high quality OEM paint. Helical coil antenna to directly connect to antenna base using M5 screw. 3M double-sided tape used to easily secure shark fin antenna. Installation requires no modification and easily reversible. Compatible for AM/FM Radio, HD radio and satellite radio signals (from OEM). Patented design. Made in Japan.
5. Wroadavee Carbon Fiber Shark Fin Antenna Auto Roof Cover for Toyota 86 GT86 Scion FR-S 2012-2019
Feature
- Fit For Toyota 86 GT86 Scion FR-S 2012-2019
- 1pcs, Please make sure this product is fit for your car,thank you !
- Material:Carbon Fiber. Colour: Same As Pictures .
- Type:Exterior Styling
- This product has double sided paste , The paste effect depends on paste conditions and the correct way of installation. Please see the installation manual.
Description
Fit For Toyota 86 GT86 Scion FR-S 2012-2019
① Clean the place where you need to paste and then wipe the water with towel or tissues. It area should not have oil, water, wax etc.
② Determine the installation location and then make comparison of the product and installation location. If the product doesn’t fit your vehicle, please contact us immediately and DO NOT INSTALL.
③ When tearing off the double-sided adhesive of cover trim, you can’t touch the double sided paste with your hand.
④ In order to achieve better effect, if the temperature is below 20 degrees, we suggest heating double sided adhesive with hair dryer or lighter .(Do not heat over 40 degrees).
⑤ Align position and then paste. The paste effect depends on paste conditions and correct installation.
⑥ 20-30 seconds or more when pasting and don’t dip the item into water within 48 hours.
6. Beat-Sonic FDA43-D4S Raven Functional Shark Fin Antenna
Feature
- Manufactured for 2013 Scion/Subaru (Canada Model only) FR-S/BRZ (Canada Model only)
- 3M Double-sided tape used to easily secure shark fin antenna
- Installation requires no modification and easily reversible
- Compatible for AM/FM radio, HD radio and satellite radio signals
- Included in package: 1 pre-painted and color matched Shark Fin antenna base with helical antenna, 1 M5 screw for attachment of antenna to base, 1 alcohol wipe
Description
The Beat-Sonic Shark Fin Antenna is specially designed and manufactured to match the roof curve of your car, to ensure exact fitment. Directly replace it with your rear roof antenna. It’s pre-painted and color matched for an exact match using high quality OEM paint. Helical coil antenna to directly connect to antenna base using M5 screw. 3M double-sided tape used to easily secure shark fin antenna. Installation requires no modification and easily reversible. Compatible for AM/FM radio and HD radios. Patent pending design. Made in Japan.
7. Beat-Sonic FDA43-37J Whiteout Functional Shark Fin Antenna
Feature
- Manufactured for 2013 Scion/Subaru (Canada Model only) FR-S/BRZ (Canada Model only)
- 3M Double-sided tape used to easily secure shark fin antenna
- Installation requires no modification and easily reversible
- Compatible for AM/FM radio, HD radio and satellite radio signals
- Included in package: 1 pre-painted and color matched Shark Fin antenna base with helical antenna, 1 M5 screw for attachment of antenna to base, 1 alcohol wipe
Description
The Beat-Sonic Shark Fin Antenna is specially designed and manufactured to match the roof curve of your car, to ensure exact fitment. Directly replace it with your rear roof antenna. It’s pre-painted and color matched for an exact match using high quality OEM paint. Helical coil antenna to directly connect to antenna base using M5 screw. 3M double-sided tape used to easily secure shark fin antenna. Installation requires no modification and easily reversible. Compatible for AM/FM radio and HD radios. Patent pending design. Made in Japan.
8. The Original 6 3/4 Inch – Car Wash Proof Short EPDM Rubber Antenna – USA Stainless Steel Threading – Powerful Internal Copper Coil/Premium Reception
Feature
- CAR WASH PROOF – Car washes are grave yards for antennas! Just time before long factory antennas bend and snap! Our redesigned 6 3/4″ now stouts a new level of strength, so much so that we guarantee and replace any that break in a car wash within 2 full year from purchase date. If it breaks, we issue a replacement. Its strength is Tried, Tested and Proven. Same Superb Reception, New Strength Standards!!! (More details below)
- STRENGTH – 304 Stainless Steel Threading
- Made in Wisconsin! The connection to your vehicle is crucial, weak brass threading often snaps leaving you extracting broken pieces out of your antenna base. Rest assured our stainless steel threading will confidently secure your new antenna. Durable EPDM rubber construction
- Specially formulated flexible rubber specific for the application of an antenna, withstanding temperatures of 257 degrees Fahrenheit.
- UNMATCHED RECEPTION / PROMISED PERFORMANCE – Our 6 3/4″ German Engineered Antenna uses choice quality materials, including a highly conductive Internal Copper Coil. While most short antennas are constructed of aluminum or steel, our copper coil is up to 85% more conductive allowing it to pull in stations most short antennas simply dream of. Simple Science, Real Results. If you’re not 100% satisfied with performance, return your antenna for a full refund!
- EXCLUSIVITY – Our 6 3/4″ is exclusively made for us by a premium OEM manufacture, its levels of performance and durability will not be found elsewhere. The authenticity of our 6 3/4″ can now be found with our faint logo in the bottom of rubber molding. With countless hours of engineering, it’s important to have an assuring mark knowing you got the real deal. The quality level of our 6 3/4″ must not be confused with attempted duplicates.
- EASY INSTALLATION – Mere minutes is all it takes, with an added minute to step back to admire the new improved looks of your vehicle.
9. Beat-Sonic FDA43-H8R Hot Lava Functional Shark Fin Antenna
Feature
- Manufactured for 2013 Scion FR-S
- 3M Double-sided tape used to easily secure shark fin antenna
- Installation requires no modification and easily reversible
- Compatible for AM/FM radio, HD radio and satellite radio signals
- Included in package: 1 pre-painted and color matched Shark Fin antenna base with helical antenna, 1 M5 screw for attachment of antenna to base, 1 alcohol wipe
Description
The Beat-Sonic Shark Fin Antenna is specially designed and manufactured to match the roof curve of your car, to ensure exact fitment. Directly replace it with your rear roof antenna. It’s pre-painted and color matched for an exact match using high quality OEM paint. Helical coil antenna to directly connect to antenna base using M5 screw. 3M double-sided tape used to easily secure shark fin antenna. Installation requires no modification and easily reversible. Compatible for AM/FM radio and HD radios. Patent pending design. Made in Japan.
10. GTP 3" Real Carbon Fiber Antenna Black Aluminum AM/FM Radio Vehicle Car Screw-in Stubby Aerial Replacement
Feature
- Fit for most vehicles with screw-on radio antenna, Replaces for stock mast/whip antenna
- 3 inch High quality aluminium and real carbon fiber
- Functional and intended for AM/FM radio signal, do not compatible with satellite radio and GPS system
- Authentic Product – Please Look for the GTP Logo and Sold ONLY by A Big Company
Description
Description:&;
• Fit for most vehicles with screw-on radio antenna
• Material: High quality aluminium and real carbon fiber
• Length: 3″
• Color: Black
Feature:
• Replaces for stock mast/whip antenna
• Functional and intended for AM/FM radio signal, do not compatible with satellite radio and GPS system.
• Easy screw-on installation with no modification, cutting, or drilling
Package Content:
• 1x Car radio antenna w/ different size screws
Conclusion
By our suggestions above, we hope that you can found Frs Shark Fin Antenna for you.Please don’t forget to share your experience by comment in this post. Thank you!