754 reviews analysed
1. Watts Premier 560075 Sensor Valve Kit for Hot Water Recirculating System
Feature
- Additional Sensor Valve Kit for use on branched hot water lines with Watts Premier Hot Water Recirculation Pumps coming from the water heater. Kit comes complete with one sensor valve, two 12 inch supply lines with fittings.
- Compatibility: This valve works only with models 500800, 500803, 500805, and 500899.
- This kit must be used in conjunction with either a 500800 or 500805 Hot water Recirculating Pump. It is NOT designed to be used with a dedicated return line to the water heater.
- Features: Thermal By-Pass Technology
- Product Dimensions: Width: 1 3/8 inches, Length: 4 5/16 inches
Description
This additional sensor valve is for homes with a branched hot water line. The kit includes a sensor valve and two 12 inch supply lines with adapter fittings. If your home has a branched hot water line simply install this sensor valve kit at the end of the branched line. No additional pumps are needed. Must have the Watts Instant Hot Water Recirculation Pump installed.
2. Libra Supply 3/4 inch Lead Free Isolation Valve Kit with Pressure Relief Valve for Rheem Tankless Water Heater, FNPT x Sweat, 3/4” Service Valve for Rinnai, Ecosmart, Navien, Noritz, Takagi, Bosch
Feature
- Dezincification Resistant (DZR) Lead Free Brass
- Easy Installation and Compact Design, Fits all Tankless Water Heater with 3/4 inch MPT Outlet
- For Hot & Cold Water, FNPT Thread x Sweat connection
- Double “O”-ring Stem Seal, Stainless Steel Ball, Large Drain Port Outlets(Full Port)
- 100% leak tested, standard brass version, Pressure Relief Valve Included
- Solder-Joint Conform ASME B16.22
- Thread Conform ANSI B1.20.1
3. Complete Set 1/2 in. NOM Inlet x 3/8 in. OD Compression Outlet Angle Shut Off Valve + Escutcheon Plate + 20" Long Stainless Steel Braided Faucet Water Supply Line (2 Pack)
Feature
- 2 x complete set of angle shut off valve set + escutcheon plate + supply line. Great for new and old work.
- Heavy duty single piece-body design to fit wrench tightly when tightening. 1/4-turn ball valve style for durability and easy on/off operation.
- Chrome plated beveled escutcheon plate and durable stainless steel braided water supply line.
- For use with faucet hook up with cold and hot water feed with water temperatures of 40-165 Degrees Fahrenheit. Great for hooking up lavatory faucets, bar spigots, laundry sink faucets, or kitchen sink faucets.
- High quality, shiny chrome-plated brass made from lead free compliant material.
4. House Mods HMP010 Brass 3/4" MIP Water Heater Replacement Drain valve(Full Port, Ball Valve, 2 inch Shank)
Feature
- Lead Free Compliant Brass Body, 304 Stainless Steel Ball Valve, 2 inch shank, Fits Water Heater Drain Port up to 1-1/2″ Deep
- FULL PORT BALL VALVE: 19 mm Flow Opening, Fast Drain, Clean out larger debris and easy to unclog
- ENLARGED OCTAGON NUT: Easy to install with a pipe wrench, do not over-tighten.
- HEAVY AND HEAVY DUTY: Net Wight: 0.95 lb.
- BIG HANDLE: Make sure you have enough room to install. NOT for use under freezing temperature.
Description
Contain less than 0.25% lead. Lead Free Compliant. California prop 65 warning: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
5. American Valve M75LS 1/2" Washing Machine Valve, 1/2-Inch
6. BrassCraft Mfg PSB52X Shut off Valve x Compression-Angle, Chrome
Feature
- Machined, one-piece body construction for strength, durability and long-lasting performance
- Removable handle helps protect against accidental operation during rough-ins
- Multi-turn operation means water flow control with only a few turns of the handle
- Temperature rating: 40 Degree to 140 Degree F. Pressure rating: 125 psi maximum
- IAPMO and CSA listed to ASME A112.18.1/CSA B125.1
Description
Product Description
Brass Craft 1/2 In. Nom Compression Inlet x 3/8 In. OD Compression Outlet Multi-Turn Angle Valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a few turns of the valve handle, you are able to stop or start the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Compatible with Copper and PEX water distribution systems. PEX installations require an insert for proper installation.
From the Manufacturer
BrassCraft 1/2 In. Nom Compression Inlet x 3/8 In. OD Compression Outlet Multi-Turn Angle Valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a few turns of the valve handle, you are able to stop or start the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Compatible with Copper and PEX water distribution systems. PEX installations require an insert for proper installation.
7. Everflow Supplies 81112PR-NL Premium Lead Free 1/2-Inch FIP x 3/8-Inch OD Compression Quarter Turn Angel Stop Valve
Feature
- Everflow product code 81112PR-NL
- Chrome Plated quarter turn angle stop valve
- With a 1/2 inch female threaded and 3/8 inch od compression fitting
- Individually boxed premium product
- By upc and NSF approved lead free product
- Approved By UPC, NSF
- Individually Boxed
- Chrome-Plated Brass Body and Tube
8. EZ-FLO 60092LF Water Heater Drain Valve
Feature
- DIMENSION: 2-1/4 inch Long Shank
- 3/4-Inch MIP Inlet x 3/4-Inch MHT Outlet
- MATERIAL: It is made up of high-quality sturdy brass for durable and leak-free fittings
- DESIGN: This pipe fitting valve is designed for MHT outlet connection which fits directly to water heaters
- USES: It provides a strong compression hold on water heaters, which can be released to drain water while cleaning or replacing elements without making a mess
- APPROVED: This item meets the requirements under the California’s Proposition 65, also known as the Safe Drinking Water and Toxic Enforcement Act and complies with lead-free plumbing laws
9. 2wayz All Metal Body Garden Hose Splitter. Newly Upgraded (2017): 100% Secured, Bolted & Threaded. Easy Grip, Smooth Long Handles y Valve. Bonus Included: 10 Washers.
Feature
- NEWLY UPGRADED (2017), LIFETIME GUARANTEED, BOLTED COMPONENTS. Inlet & outlet will never fall even after extensive use. After many months of lab trials, our expert engineers have completely reconstructed critical components of the splitter. The 2 spouts are now fastened with metal bolts, and won’t disconnect. The neck is affixed with threads, forever anchoring the two parts. Either this item will hold, or you take your money back! This never gets old: UNLIMITED MONEY BACK GUARANTEE.
- SEAMLESS INSTALLATION, SMOOTH OPERATION: The 2wayz Garden Hose Splitter has long handles (4 cm!) which allow for smooth and easy shut on and off. Because the splitter is coated with rubber, it is ideal for for stiff hands or hands with arthritis. Other than a basic understanding of how spigots and hoses work, no tool are needed, ensuring an easy and flawless installation. The splitter is also able to rotate 360 degrees, allowing you to tug and pull hoses in all directions.
- FAMILY SAFETY FIRST. Our heavy duty metal splitter (0.0019% lead in alloy!) is now bundled with 10 rubber gaskets. Don’t go anywhere, we’ve got you covered!
- NO MORE LEAKS. NO MORE WATERSHED. Long and smooth thread with rubber ring at female end will make leaks a long forgotten experience. Touchy? No problem. Full rubber cover makes working with the splitter easy in all kinds of weather.
- BUILT TO LAST. GUARANTEED. Nobody comes close to G&S Investment’s customer service. Every item we manufacture and sell comes with a HASSLE FREE unlimited money back guarantee. If you do not experience a high quality, leak free, time saving and simple experience, G&S Investments will replace your item or fully refund you, with no questions asked!
10. GE WD15X10003 Water Valve for Dishwasher
Description
Product description
Genuine Original Equipment Manufacturer (OEM) parts! This water inlet valve (part number WD15X10003) is for dishwashers. Water inlet valve WD15X10003 supplies water to the dishwasher. Unplug the dishwasher and shut off the water supply before installing this part. Wear work gloves to protect your hands. For Hotpoint, Kenmore, & Sears.
From the Manufacturer
Water Valve. Works with the following models: General Electric EDW1500G00BB, General Electric EDW1500G00CC, General Electric EDW1500G00WW, General Electric EDW2020F00BB, General Electric EDW2020F01BB. voltage is 110/120 as in use in the USA.
Conclusion
By our suggestions above, we hope that you can found Honeywell 1920 Hot Water Valve for you.Please don’t forget to share your experience by comment in this post. Thank you!
