Top 10 Honeywell Performance Replacement Camera

Our Backup Camera w/Tailgate Handle is designed for Ford F150 F250 F350 F450 F550

Installation Tips:

Camera cable connection:
1,with the arrows to align, it is tips for match between camera cable and the extension cable;

Camera power:
1, Ensure the voltage is 12V;
2, Connect the red power cable(on the extension cable) to get the power for the camera(it could attach to head unit power), and black cable connect to the ground;
Depending on your setup, may be a power wire that only turns on when the vehicle is in reverse. Or if you wanted the camera to always be on, you can connect it to a 12v source.
.
Aftermarket Display:
1, Use Camera RCA to connect aftermarket Display video input

Package Included: 1*Backup Camera 1*Extension cable 1 (21.5 ft)*Manual 1*RCA barrel connector
Warranty: any missing parts or defective, please feel free to contact us, we will replace with a new set to you.

This 4-in-1 professional Bullet security camera built-in 1/2. 7″ Cmos image sensor, with 2. 0 Megapixel resolution and an advanced circuit design, It adopts an advanced image processing technology. The camera resolution is as high as 1080P full HD, which ensures clear and bright pictures. this 1080P full HD camera has a built-in OSD menu that can change the 4 different video outputs HD-TVI, AHD, CVI, and CVBS(960H) and adjust the video settings. switch from TVI: press Rightward for 5 seconds switch from CVBS: press Upward for 5 seconds switch from CVI: press downward for 5 seconds this 4-in1 camera is fully compatible for the following HD DVRs: hikvision, Dahua, GW, LTS, Q-See, Swann, Samsung, night owl, best vision, HD view, hq-cam, Ananke, Aposonic, I-DVR Pro, Vonnic, digital Watchdog, log is AF, SANNCE, venetech, spec, Alibi, kt&c, Cantek, Zosi and many more. q: video loss appears where the image from my camera should be displaying on my DVR? a: 1. Check the extension cable (power and video) is securely connected to the camera. 2. Check the video output from the camera is securely connected to a video input channel on the DVR. 3. Check the power from the camera is securely connected to a power supply. 4. The camera mode do not match your DVR. There is 2 ways to setup. (1) press OSD joystick “down” 5 seconds, if still no picture Come, try to press “left” “RIGHT””UP” for 5 second, till the signal matching your DVR. (2) make sure the signal of your DVR, use OSD joystick to change the mode of the camera according to your DVRs video mode. zero-risk purchase, 100% satisfaction 365 days 100% money-back . We will refund you immediately if you are not satisfied with our products.

1.We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.

2.Please allow 0.5-1 inch difference due to manual measurement.

3.Although instruction is included.Professional Installation Is Highly Recommended!

4.Please Compare The Rear view Backup Camera With Your Original license plate or trunk handle Before Purchasing！

Compatible with:

Fitments (For the reference):

for Ford F150 (2005-2014)

for Ford F250(2008-2014)

for Ford F350(2008-2014)

for Ford F450(2008-2014)

for Ford F550(2008-2014)

-Color: Black or White

-Camera Model: RVC-Cam 6

-Compatible Vehicle Make: Universal

-Camera Connection Type: Wired

-Resolution: 1000 TVL

-Image device:1/3 inch CCD color image sensor.

-TV system: NTSC

-Minimum illumination: 0.3Lux/F1.2

-Lens: 3.6mm/2.8mm/1.8mm

-Power Consumption: 250mA

-Power Supply: DC 12V

-Video Output: RCA connector

-Viewing angle: 150-170 Degree

-Operating temperature:-22 to 122 degrees centigrade Rh95%

1 x Super HD Pro Car Rear view Camera

1 x Power Cable (1.5m/4.9ft)

1 x AV Cable (6m/19ft)

1 x User Manual

Ford tailgate backup camera with tailgate handel for F150/F250/F350/F450/F550. For use with: Ford F150 (2005-2014), F250(2008-2016), F350(2008-2016), F450(2008-2016), F550(2008-2016). Universal RCA connector for video interface.

Product Description

Instead of buying a whole new earmuff, you can save money with the Howard Leight by Honeywell Hygiene Kit for Impact Sport and Sync Radio Earmuffs. This kit includes one pair of our specially-designed ear cushions and one pair of foam inserts. Together they can extend the lifespan of your earmuff and improve its performance. Replacing the old ear pads is easy: just pop out the old ones and snap the new ones into place. Replacement is recommended every six months; more frequently if your earmuff sees heavy use.

From the Manufacturer

Howard Leight Hygiene Kits extend the performance and lifetime of our earmuffs. Each package includes one pair of replacement ear cushions and one pair of foam inserts. Snap-in ear cushions are standard on all Howard Leight earmuffs. Recommended replacement every 6 months with general use, more frequently with heavy use. This product is for our Howard Leight Impact Sport, Impact Sport MIL, Sync Radio and Sync Electo earmuffs.

Filter Retainer for 7506N95, 7506N99 and 7506R95 Filters when used with gas and vapor cartridges. Includes two ea N750027 filter covers and two ea N750038 filter spiders