815 reviews analysed
1. Honeywell C7027A1023 Ultraviolet Flame Detector
Feature
- Use with Honeywell Flame Safeguard primary safety controls and burners requiring ultraviolet flame detection
- C7027 mounts on a 1/2 in. sighting pipe by using an integral collar
- Detectors can be wired in parallel for difficult sighting applications
- C7027 seals against pressures up to 5 psi (34.5kPa) when correctly installed
- Allows for blast tube mounting due to compact size
2. Aeotec Multisensor 6, Z-Wave Plus 6-in1 motion, temperature, humidity, light, UV, vibration sensor
Feature
- 6-in-1 Z-Wave Plus MultiSensor: motion, humidity, temperature, light lux, UV, vibration sensor.
- 2 year battery life
- Super-small at 1.8 inches. Can be installed in corner, in-wall, on shelf or in downlight.
- Works with certified Z-Wave gateways and tested with Fibaro, Indigo 7, openHAB, SmartThings, Vera.
- Z-Wave Plus certified. Certification number: ZC10-15070011
Description
MultiSensor 6 is the foundation of a modern smart home. Its perfectly small exterior hosts the technology for real-time intelligence. Designed and calibrated to be as accurate as it can be, MultiSensor 6’s accuracy varies as little as ±0.2%. The device measures ultraviolet light and can protect your family’s health and your furniture from bleaching. With the newly added vibration sensor, MultiSensor 6 makes your environment secure like never before. MultiSensor 6 is a part of Aeotec Gen5 range of Z-Wave products. That means that it outperforms all that has come before it. It’s built around the latest Z-Wave 500 series chip and firmware, providing a 50% greater wireless range and a 250% faster communication speed over previous Z-Wave products. It has AES 128 bit security encryption built right in. You need a Z-Wave gateway which operates with the 500 series chip products to take full advantage of the device. Please consult the manufacturer of your Z-Wave hub to make sure it supports all MultiSensor 6 features. SPECIFICATIONS: Motion Sensor : 16 feet, and 120° field of view; Humidity Sensor : 20% to 95%, accuracy:+/- 5% at 77°F; Temperature Sensor : 14°F (-10°C) ~ 140°F (60°C), accuracy: +/- 32.9°F (0.5°C); Light Sensor : 0 lux to 1000 lux; Vibration Sensor : acts as tamper switch, ON or OFF; Operation Temperature (Top): -4°F (-20°C) ~ 140°F (40°C); Storing Temperature: -40°F (-40°C) ~ 176°F (80°C); Working Humidity: 8% ~ 80%; Operational site: Indoor and outdoor; Power: DC 5V 500mA or 2 x CR123A battery; Weight: 2.6 oz
3. Sun Meter UV Card – 6 Cards, Plastic Cards
Feature
- Sun Meter UV card measures the intensity of the UV rays that burn your skin. UV burns can cause skin cancer and other illness.
- Card changes colors from White to Dark Purple based on the UV ray strength. Chart recommends different SPF sunscreen for best protection.
- Plastic card, credit card size, 3 3/8 inch x 2 1/8 inch comes in a clear plastic sleeve. Durable and long lasting.
- New High Tech, Non-Toxic, environmentally friendly detection matrial that is printed on the card to measure the UV rays of the sun.
- Can be used over and over again. Great handout. Excellent educational handout or promotional item.
Description
With the depletion of the ozone layer, the number of skin cancer and other health problems has risen dramatically, and the public is being advised to avoid prolonged exposure to the sun. But on any given day, how much exposure is too much, and how much SPF protection is enough? The credit card sized UV Meter Card is designed with a remarkable UV sensitive strip which changes from white to a shade of purple when exposed to UV radiation for only 10 seconds. Designed to react primarily to the wavelengths of lights between 290-325 nm, (the UV range) which are known to be the sunburn and skin damaging rays. The stronger the radiation, the darker the shade of purple. Simply compare on the adjacent color matching chart to see the corresponding “likelihood of sunburn” warning. Guidelines printed right on the meter card allow the user to determine the sun-screen SPA level required under the prevailing conditions [this is not a high precision instrument]. Reading Radiation Levels. Low – Use low sunscreen protection. High – Use a good sunscreen. Extreme – Use highest sunscreen or sun block and stay in the sun for only a short amount of time. You can now take immediate measurements to ensure that you are protecting the health of your family, friends, and associates. The card will change back to its original color within minutes and can be reused hundreds of times. Great for days at the beach, camping, boating. outdoor sports, and perfect for anyone who works outdoors. Also great for student projects. An excellent product to promote and market your spa, wellness center, cosmetic line, plastic surgery, outdoor clothing, sun screen, etc. You will receive – 6 Sun Meter UV cards, Plastic Cards
4. Honeywell C7027A1072 Mini-Peeper Ultraviolet Scanner
5. Adafruit VEML6075 UVA UVB UV Index Sensor Breakout (3964)
Description
This little sensor is a great way to add UVA and UVB light sensing to any microcontroller project. The VEML6075 from Vishay has both true UVA and UVB band light sensors and an I2C-controlled ADC that will take readings and integrate them. The sensor also comes with calibration registers so you can easily convert the UVA/UVB readings into the UV Index. Compared to our other UV sensors, this one actually does a pretty good job of getting accurate UV data. Unlike the Si1145, it has a real UV sensor, and in contrast to the VEML6070, it has dual band senors and an Index calculation algorithm. So far this is the best UV sensor we’ve got! This UV sensor works great with 3 or 5V power or logic, its nice and compact, and its easy to use with any I2C-capable microcontroller. We have example code and libraries for Arduino and CircuitPython/Python. Each order comes with one assembled PCB with a sensor, power regulator, level shifting and a small piece of header. Some light soldering is required to attach the header but it’s a fast task!
6. Extech UV505 Pocket UV-Ab Light Meter
Description
The Extech UV505 pocket-sized UV light meter measures UV-AB light from Natural and artificial light sources used in outdoor activities and indoor medical testing, laboratory/research, industrial, education, electronics, and forensics/criminology applications. It offers a backlit display, cosine corrected sensor, two selectable ranges, Zero function, display hold, and auto power off. Includes a pouch to protect and store your meter.
7. DC3.3-5V 200nm-370nm Response Wavelength UV Detection Sensor Module Ultraviolet Ray UV Sensor Module
Description
Overview
Output voltage boosts along with the ambient ultraviolet intensity increases
Onboard amplifier circuit with adjustable amplification factor
Specifications
Response spectrum: 200nm-370nm
Dimension: 22.0mm * 16.0mm
Mounting holes size: 2.0mm
Applications
Ultraviolet tester
Outdoor ultraviolet detector
Germicidal lamp
How to Use
In the case of working with a MCU:
VCC ↔ 3.3V ~ 5.0V
GND ↔ power supply ground
AOUT ↔ MCU.IO (analog output)
Downloads
Development resources: demo codes, schematic, datasheets, etc.
Wiki: www.waveshare.com/wiki/UV_Sensor
8. Portable Ultraviolet AB Light Meter UV Checker Atmospheric Light Meter, 240-370 nm
Feature
- UV AB Measurement Range:0 to 2999 µW/cm2
- It only measures UV AB light power output, but not the wavelength.
- Spectral Detection Range:240 to 370 nm
- Peak point:352 nm. It does not measure UVC.
- Measurement accuracy:±4% ±1 digits
- Resolution:1.0 µW/cm2
- Only one power button and easy to operate
- Two AAA Alkaline Batteries. Some usage examples: check uvb reptile bulbs, verify uv blocking glasses, etc.
Description
iU2 is a precise meter that measures ultraviolet UVA and UVB radiation. Applications include: Testing Window Film / Tint Transmission; Monitoring Low Level UV from Household Lamps; Testing Ground level UV From Stadium Lighting; Testing Ground level UV From Stage and Theater Lighting; Measuring Outdoor UV Including Shady Area UV; Monitoring UVA Lamp Intensity and Aging; Monitoring UV LED (< 360="" nm);="" monitoring="" puva="" therapy="" lamp="" intensity="" and="" aging;="" testing="" uva="" in="" industrial="" glue="" curing.="" materials="" supplied="" (1)santacary="" iu2="" ultraviolet="" ab="" light="" meter="" (2)protector="" bag="" (3)english="" user="" manual="" (4)two="" aaa="" alkaline="" batteries.="">
9. Comimark 1Pcs UVM-30A UV Ultraviolet Ray Detection Sensor Module 3-5V for Arduino
Feature
- Operating Voltage: DC 3-5VOutput voltage: DC 0-1V
- Test accuracy: ±1UV INDEX
- Detect UV wavelength:200-370nm
- Package included: 1PCS x UVM-30A UV Ultraviolet Detection Ray Sensor Module 3V 5V for Arduino
- If You Are Not Satisfied with Your Purchase for Any Reason, Please Feel Free To Contact Us at the Buyer Center or Support Email, 24/7 Quick Reply.
Description
Product descripton:
Operating Voltage: DC 3-5VOutput voltage: DC 0-1V
Test accuracy: ±1UV INDEX
Current: 0.06mA(typ), 0.1mA(max).
Response wavelength: 200nm-370nm
Work temperature: -20℃~85℃
Detect UV wavelength:200-370nm
PCB size:28mm*12mm*10mm
Package included:
1PCS x UVM-30A UV Ultraviolet Detection Ray Sensor Module 3V 5V for Arduino
10. UV Radiation Detector, KKmoon Portable Digital UV Ultraviolet Radiation Detector UV UVI Meter Radiometer Tester with Time and Temperature Display
Feature
- /◕‿◕/Functions: clock display, instrument temperature detection, UVI level detection, early warning of protection level, detection of ultraviolet radiation dose.
- /◕‿◕/Suitable for the detection of ultraviolet (UV) radiation in sunlight, indoor lighting, ultraviolet lamps and other equipment.
- /◕‿◕/This ultraviolet (UV) radiation detector can also be used to test and verify the protection effects of anti-ultraviolet products in life, such as automobile films, curtains, protective clothing, glasses, protective articles, etc.
- /◕‿◕/LCD digital display screen, you can read the measure data clearly. Compact and lightweight, easy to use and carry. It is a multifunctional household daily use and travel essential goods.
- /◕‿◕/Two power supply methods: you can use USB interface or battery (not included) to supply power. There is a bracket on the back for easy placement.
Description
◕‿◕This is a small, accurate and portable UV radiation tester with a wide range of applications. It can detect ultraviolet radiation in real time, leaving the radiation nowhere to hide.
◕‿◕Specifications:
▶Material: ABS
▶Color: black
▶Display window: 2.2 inches
▶Working voltage: 5V
▶Battery: 2 * AAA battery (not included)
▶Detection error: less than 15%
▶Sampling speed: less than 3 seconds
▶Detection range: 0-22 0-3000uw / c-m²
▶Standby time: 2-3 hours
▶Display type: digital display
▶Display principle: LCD display
▶Detection principle: lighting analysis and detection
▶Application technology: sensor technology application
▶Item size: 127 * 54 * 18mm / 5.0 * 2.1 * 0.7in
▶Item weight: 96g / 3.4ounce
▶Package size: 145 * 58 * 24mm / 5.7 * 2.3 * 0.9in
▶Package weight: 130g / 4.6ounce
◕‿◕Features:
▶Compact and lightweight, easy to use and carry.
▶LCD digital display screen, you can read the measure data clearly.
▶There is a bracket on the back for easy placement.
▶It is a multifunctional household daily use and travel essential goods.
▶Functions: clock display, instrument temperature detection, UVI level detection, early warning of protection level, detection of ultraviolet radiation dose.
▶Suitable for the detection of ultraviolet (UV) radiation in sunlight, indoor lighting, ultraviolet lamps and other equipment.
▶This ultraviolet (UV) radiation detector can also be used to test and verify the protection effects of anti-ultraviolet products in life, such as automobile films, curtains, protective clothing, glasses, protective articles, etc.
▶Two power supply methods: you can use USB interface or battery (not included) to supply power.
◕‿◕Packing List:
1 * Ultraviolet Radiation Detector
1 * User Manual
Conclusion
By our suggestions above, we hope that you can found Honeywell Uv Sensor C7027 for you.Please don’t forget to share your experience by comment in this post. Thank you!