777 reviews analysed
1. Secura 9100MC 1800W Portable Induction Cooktop Countertop Burner, Black
- 15 power levels from 200-1800Watts
- 15 temperature range from 140 Degree Fahrenheit to 460 Degree Fahrenheit
- Digital control panel
- Lightweight and compact for easy handling and storage
- Built-in count-down digital timer with 1 min increments up to 170 minutes
- The auto-pan detection
- Equipped with diagnostic error message system, Low and high voltage warning system
- REQUIRES INDUCTION COMPATIBLE MAGNETIC COOKWARE. Compatible with Duxtop and other induction ready cookware such as cast aluminum enameled iron and steel, stainless steel with a magnetic bottom, or cast iron
- Product Built to North American Electrical Standards, 120V 60Hz AC
- 2-year warranty
- ETL approved
2. Induction Heating Bolt Remover Tool – Handheld Bolt Buster Gun, Induction Bolt Heater Tool Kit
- * EASY TO USE just plug in and use the tool on stubborn rusted bolts until they get cherry red hot.
- * GREAT THING TO HAVE an induction bolt heater in your tool box, takes all the fight out of the job.
- * SAFER AND CLEANER by replacing torches, it greatly reduces the risk of accidents and potential damage.
- * GREAT TOOL for many situations, there are always rusted nuts and bolts on older machinery, equipment you are trying to repair. Stop breaking good tools trying to break free bolts.
- * PURCHASE GUARANTEE please contact us to return or refund within 30 days if the products get any defects or damages when you receive it, or the goods is damaged or unusable due to quality problems during use.
Why Choose the WOYO HBR:
Every technician knows that in the repairing process the removal of the seized nuts and bolts can be time consuming work . The traditional way is to use a torche but open flame can be dangerous. With the WOYO heating bolt remover, with flameless heating, you can quickly and easily perform damage free parts removals.
– Easy to use, you will need only 3 minutes to master
– Green, Safety, Flameless
– It is equipped with two LED lights for narrow and dark spaces
– It will not damage the bolt or the material around the equipment.
– It is a flameless tool that can quickly and easily loosen rusted bolts.
– More coils are available. Each line is suitable for the size of different types of bolts.
– You will need 60 seconds to reach 400°C
Model: HBR012 / HBR110
Input voltage: 12V / 110V 50/60Hz
Input current: 40A / 7A
Output power: 500W / 500-900W
Output voltage: 40V / 45V
Output current: 120A / 180A
Woyo HBR Mainset*1
1m Flexible Soft Coil*1
bore diameter 18mm coil*1
bore diameter 22mm coil*1
bore diameter 28mm coil*1
3. 15KW 30-80 KHz High Frequency Induction Heater Furnace 220 V
4. Happybuy 15KW 30-100KHz High Frequency Induction Heater Furnace Melting Furnace System LH-15A Max Heating Capacity 2200 ℃ (3992 ℉)
- Output power: 15 KW Output current: 200 – 600 A Fluctuating frequency: 30 – 100 KHZ Input voltage: Single phase 110 V, 60 Hz
- Adopts the latest MOSPET, IGBT power units and frequency conversion control techniques with high efficiency, low energy consumption and higher output power
- With constant current and constant power control function to greatly optimize the heating process of metals, realize efficient and fast heating, and fully exert the superiority of the products
- Power consumption is half of traditional electron tube high frequency induction heating equipments under same conditions
- 1. Welding: brazing, silver welding. 2. Heating: hot forging, hot with, smelting. 3. Heat treatment: surface quenching. 4. Annealing: tempering, quenched and tempered.
5. 1800W ZVS Induction Heating Board Module Low Voltage High Frequency 12-48V Flyback Driver Heater with Tesla Coil and Cooling Fan
- The induction heating boards maximum power is 1800W, adopted super PCB layout design and super heat sink, heat dissipation good, since with a cooling fan interface, can also do Tesla discharge, generator voltage inverter, etc
- The induction heating circuit adopt 12-48V DC power supply, maximum current is 40A, the power uo to 1800W. It can work continuously under the condition of good heat dissipation. moderate power which make it can be used to quenching, annealing and other heat treatment. also for melted with graphite crucible kim/silver/ copper/aluminum and so on, heating is evenly and fast
- it is recommended that not exceed 48V 35A to prevent accidents and damage,Although withstand more than 40A current.Induction heating is recommended to use 36V 20A power supply, 12V power supply is too small almost without response, and 12V power might lead to the voltage decreases, which is very dangerous.More than 24V/20A power supply, the greater the voltage/current, the greater the heating power, heating faster.
- please check the power output meets the requirements if the MOS tube fever,and be sure to do a good job of cooling.Do not empty the board, otherwise it will create a very high noise, then MOS tube will burn out
- please do not to heat too large metal, otherwise it may be overloaded, please add a 35A fuse or ammeter and air switch for better use (not included).
Product size:Approx.180x90x80mm (please allowed 1-3mm error)
Heater ring inner:70mm (Recommended crucible+quartz suit,maximum support of 58mm crucible)
New style :AC 100-220V Adapter
Old style: Main board Input voltage: 12V-48V recommend: 36V above
Power requirements: less than 12V≥10A , 15V above≥15A
NOTE:New style and Old style shipped by randomly!!!
It doesn’t affect the performance of product.!!!
Maximum power: 1800W
Maximum current: 40A
1 x PCB board
1 x 48V copper tube
1.The power of heating is very large, except that the plate and components are hot, and the heat of copper tube is very high. you can buy a small water pump and 2 meters of rubber hose(inner diameter is 4mm) for build a water cooling system
Please pay attention to using switch power supply, because output voltage is slowly rising, and if the voltage rise to 10V before connected induction heating circuit that will be lead to circuit can’t afford to vibrate caused by lacking voltage,so that the two MOS tube conduction and components will burned
comes with heating circle diameter-60 mm/design voltage-36V,if you use more than 40V Devices shall be used ≥70 mm diameter heating ring, DC 12V water pump use, please use separate power supply voltage regulator module to avoid fan and water pump are burn out
The minimum input is 12V, but it doesn’t mean all 12V power supply available,The module has specific requirements on voltage and current , 12V require current must than 10A ,output power will greatly reduced if the power is too low ,which will lead to two MOS conduction at the same time & burn MOS tube when lower than 12V
6. Bewinner 2000W High Voltage Induction Heater Module Flyback Driver Heating Board(US Plug 100-240V)
7. fosa 1800W Induction Heating Module ZVS Low Voltage 12V-48V Induction Heating Board Flyback Driver Heater DIY High Frequency Induction Heating Machine Module
- This product has a maximum power of 1800W, super PCB layout design and super heat sink, superior heat dissipation effect
- 12-48V low voltage DC power supply with a maximum current of 40A. It can work continuously for several hours with good heat dissipation
- Can use graphite crucible to melt gold, silver, copper, aluminum and other metals, heating evenly, fast and very convenient
- With a cooling fan interface, can also do Tesla discharge, generator voltage inverter, etc
- It is recommended not to exceed 48V 35A to prevent accidents and damage
Input Voltage: 12V-48V (Recommendation: above 36V)
Power Requirments: Less than 12V >=10A, More than 15V >=15A
Maximum Power: 1800W
Maximum Current: 40A
Heater Inner Ring: 70mm / 2.8in
Size: 18 * 12 * 9 cm / 7.1 * 4.7 * 3.5in
Weight: Approx. 1052g
1 x PCB Board
1 x Copper Tube
1. When using a switching power supply, make sure that the power supply voltage is stable before connecting to the induction heating circuit.
2. Do not heat metal that is too large or it may be overloaded. Please add a 35A fuse or ammeter.
3. Although this driver board can withstand more than 40A, it is recommended not to exceed 48V 35A to prevent accidents and damage.
4. The minimum input voltage of the module is 12V, the voltage of 12V must be greater than 10A to use the power supply.
5. If you find that the MOS tube is hot, first consider whether the power output meets the requirements.
6. Do not clear the circuit board, otherwise it will emit a very high frequency of noise, and then the MOS tube will burn out.
7. It is recommended to use a 36V 20A power supply. Below 12V is very dangerous.
8. 1000W 20A ZVS Low Voltage Induction Heating Board Module Tesla with Coil 12V-48V Flyback Driver Heater DIY
- 12-48V low voltage power supply. Maximum current 20A, Maximum power 1000W.The bigger voltage, the higher power.
- Tested 53V power supply when working properly. It can be used for DIY players to make small parts quenching, annealing and other heat treatment, heating fast, very convenient
- This circuit can do induction heating, or replace copper tube with high frequency transformer, it will be a powerful inverter
- The higher voltage, the higher current when heating the same things, the effect is better, but at the same time heating is also higher, therefore the choice of input voltage is based on your need.24V or 36V power supply is enough
- Note: buyer need to bring their own power and cooling unit
24V input with no load current of 3A , 48V input with no load current of 6A
buyer need self-provided power and water cooling device
This circuit can do induction heating, or replace copper tube with high frequency transformer, it will be a powerful inverter
The kit contains a full set of driving circuit elements and brass
Buyers need to bring their own power and cooling unit.
The circuit board using double-sided fiberglass board, mainly copper traces are used to widen use the entire back surface of the resonant circuit common, continuous work, please add a fan to blow down from above, to the resonance capacitors and other components cool.
The use of switching power supply Please note that due to high power are generally slow start function, which just opened machine output voltage is slowly rising, while it is turned on before the induction heating circuit if the voltage rises to 12V, because start insufficient voltage can not afford to vibration, resulting in two simultaneous conduction mos tube so burned components.
So the first will start switching power supply voltage reaches 12V above and then access the induction heating circuit.
The volume of the object being heated inside the heating coil can not exceed 1/5 of the volume (if the heating cylinder, then heating coil diameter less than the diameter of 1/3), or it may be due to overload or burn out the power supply to the circuit.
Although this circuit can tolerate 20-30A input current moment, but do not exceed 15A when safe work, you can easily add an ammeter between the power supply and heating driver board but always monitor the current overload
1 x 20A 1000W Flyback driver inductive heater Zero Voltage Switching Tesla
1 x Coil
9. Induction Heating Module ZVS Low Voltage Induction Heating Board Driver Heater DIY High Frequency Induction Heating Machine Module 1800W 12V-48V
- This induction heating circuit uses 12-48V low voltage DC power supply, maximum current 40A, the most highest power is 1800W. It can work continuously under the condition of good heat dissipation.
- Input voltage: 12V-48V recommend: 36V above
- Power requirements: less than 12V≥10A , 15V above≥15A
- Maximum power: 1800W
- Maximum current: 40A.
- Product size: 180mm x 90mm x 80mm (Manual measurement, error about 3mm, please understand).
- Heater ring inner: 70mm (Recommended crucible + quartz suit, maximum support of 58mm crucible)
- The ZVS induction heater can be used by DIY players to give smaller players the parts can be treated by quenching, annealing and other heat treatment. You can also be melted with graphite crucible Kim, silver, copper, aluminum and other metal, heating evenly, is fast and very convenient.
Maximum power of 1800W, super PCB layout design and super heat sink, superior heat dissipation effect.
12-48V low voltage DC power supply with a maximum current of 40A. It can work continuously for several hours with good heat dissipation.
Can use graphite crucible to melt gold, silver, copper, aluminum and other metals, heating evenly, fast and very convenient.
With a cooling fan interface, can also do Tesla discharge, generator voltage inverter, etc.
It is recommended not to exceed 48V 35A to prevent accidents and damage.
Due to its moderate power, it can be used by DIY players to give smaller players the parts can be treated by quenching, annealing and other heat treatment.
You can also be melted with graphite crucible Kim, Silver, Copper, aluminum and other metal, heating evenly, is fast and very convenient.
1 x PCB board
1 x 48V copper tube
10. DC 12V-24V 1000W 50 A ZVS Low Voltage High Frequency Induction Heating Module Board with Tesla Coil and Cooling Fan
- Input voltage DC 12V ~ 40V, maximum input current 50A (short), recommended Input voltage range DC 24V ~ 36V
- The power supply used for heating must be large enough
- Using a protective power supply, don’t use battery or battery power
- For long time use, brass tube with water must be used for cooling
- This one is mainly used for heating
Note: It is the working voltage work, the input voltage when the coil is connected or heated. Not the no load voltage. When 12V for power supply, the current should be no less than 20A; when 24V for power supply, the current should be no less than 30A; when 36V for power supply, the current should be no less than 50A. For long time use, brass tube with water must be used for cooling.Output port copper cylinder can most install copper tube of 10mm diameter; when the copper diameter is no more than 4mm, you can solder the copper tube on the clip then fix the copper cylinder; when the diameter is no more than 2mm, it can be connected with output terminal.
This one is mainly used for heating, suitable for the heating power is less than 300W.
Input Voltage: DC 12-40V
Max Input Current: 50A (short time)
PCB Size: 16.5 x 11.2cm/6.5 x 4.4 inch
Board thickness: 0.16cm/0.063inch(only board)
1 x induction heating module
1 x brass tube
1 set x brass cylinder and screw
By our suggestions above, we hope that you can found Induction Heating Elementcook for you.Please don’t forget to share your experience by comment in this post. Thank you!