Top 10 Raspberry Pi 3 Cooling Fan Case

0

Nowadays, there are so many products of raspberry pi 3 cooling fan case in the market and you are wondering to choose a best one.You have searched for raspberry pi 3 cooling fan case in many merchants, compared about products prices & reviews before deciding to buy them.

You are in RIGHT PLACE.

Here are some of best sellings raspberry pi 3 cooling fan case which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.

809 reviews analysed

1. Miuzei Raspberry Pi 3 B+ Case with Fan Cooling and 3× Heat-Sinks, 5V 2.5A Power Supply with On/Off Switch Cable for RPi 3 B+, 3B, 2b

Miuzei Raspberry Pi 3 B+ Case with Fan Cooling and 3× Heat-Sinks, 5V 2.5A Power Supply with On/Off Switch Cable for RPi 3 B+, 3B, 2b

Feature

Description

Color:Black-Clear

(The Same Case Kit for RPI 4, please go to: http://www.amazon.com/dp/B07TTN1M7G)
This is 9 layers case for raspberry pi 3 model B+, also could compatible with raspberry pi 3 /pi 2 .

Product Feature:
1. All ports are available
Special design is easy to insert/remove SD card, allows Breakout cable, HDMI cable and other ports for RPi access.
2. Better heat dissipation performance
The mute mini cooling fan and aluminum heatsinks have stronger heat radiation while the pi board working.
3. Good quality material
The raspberry pi 3 case with clear acrylic layers is more durable to protect your RPi board!
4. Crystal-like appearance
Clear case is easy to watch the internal state while pi board working to check if all electronic components function normally.

Package Included:
1x Acrylic Case for Raspberry Pi 3 model B+ / 3 / 2
1x Mute Cooling Fan
1x 5V 2.5A Power Supply
3x Aluminum Heat Sinks 14*14*6mm x 2(Large) 9*9*5mm x 1 (small)
4x Metal Screws and Bolts for the case

Related Item:
Miuzei Raspberry Pi 3 B+ Case with Fan (The same case without power supply): http://a.co/1YTEbRO (B07C6CFL2B)
Miuzei Raspberry Pi Camera Module: http://a.co/eBHmA2y (B07BTP8VXL)

Note: Please peel off the protective films on the top and bottom layers before use, the film was tiny and not easily noticeable
Please make sure the layer 3 was installed right, if you installed it 180 degrees backwards, it will make all the difference in the power plug fitting.

(1) Small components inside, please away from young kids below 3yrs.
(2) Kindly to know this case can’t fit for ASUS tinker board.

Any question there, please don’t hesitate to contact us to get support and services via Buyer Message or Q&A

2. iUniker Raspberry Pi 3 B+ Case, Raspberry Pi Fan ABS Case with Cooling Fan, Raspberry Pi Heatsink, Simple Removable Top Cover for Pi 3 B+, Pi 3 Model B, Pi 2 Model B (Black for 3B+/3B)

iUniker Raspberry Pi 3 B+ Case, Raspberry Pi Fan ABS Case with Cooling Fan, Raspberry Pi Heatsink, Simple Removable Top Cover for Pi 3 B+, Pi 3 Model B, Pi 2 Model B (Black for 3B+/3B)

Feature

3. Smraza Raspberry Pi 3 B+ Case with Fan, RPI Heatsinks, 5V 2.5A Power Supply for Raspberry Pi 3 Model B+(B Plus), Compatible with Raspberry Pi 3 Model B, Pi 2 Model B (4 Layers Case)

Smraza Raspberry Pi 3 B+ Case with Fan, RPI Heatsinks, 5V 2.5A Power Supply for Raspberry Pi 3 Model B+(B Plus), Compatible with Raspberry Pi 3 Model B, Pi 2 Model B (4 Layers Case)

Feature

4. Smraza Compatible with Raspberry Pi 4 Case, Acrylic Case with Cooling Fan, 4PCS Heatsinks, 5V 3A USB-C Power Supply for Raspberry Pi 4 Model B (RPI 4 Board Not Included) – Black

Smraza Compatible with Raspberry Pi 4 Case, Acrylic Case with Cooling Fan, 4PCS Heatsinks, 5V 3A USB-C Power Supply for Raspberry Pi 4 Model B (RPI 4 Board Not Included) - Black

Feature

Description

Color:Case Kit for Raspberry Pi 4

New 9 Layers Case designed for Raspberry Pi 4 Model B

· This Smraza 9 layers case is designed for the latest Raspberry Pi 4 Model B boards, which were released in June 2019.
· Made of acrylic material, which won’t block Pi’s Wifi or Bluetooth signal. Keep your Raspberry Pi 4 Model B motherboard safer and nicer. Clear case is easy to watch the internal state while pi board working to check if all electronic components function normally.
· If you have any question with this case,please feel free to get support and services via Buyer Message or Q&A.

Product Feature:

Easy to Access to All Ports
Cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card. Special design is easy to insert / remove SD card.

Excellent Heat Dissipation Performance
Double cooling with 1 quiet cooling fan & 4 aluminum heatsinks. Have strong heat dissipation performance while the raspberry pi 4 model b board working, no more worry about overheating.

Convenient to Turn ON / OFF Your Pi 4
5V / 3A DC output USB-C power supply for Raspberry Pi 4 with on/off switch on the 59 inch cable. Easily press button to power on or power off Raspberry Pi 4 Model B board.

NOTE:
This case is specially designed for Raspberry Pi 4. NOT compatible with other model of Raspberry Pi.
Please remove the protective films of the case before you assemble it.
The package does not include the Raspberry Pi 4 Model B board.
Small components inside, please away from kids below 3yrs.

Package Included:
1 x Acrylic Case for Raspberry Pi 4 Model B
4 x Aluminum Heatsinks
1 x 5V / 3A USB-C Power Supply
1 x Quiet Cooling Fan
4 x Rubber Nut Feet
1 x Installation Manual

5. Miuzei Case for Raspberry Pi 4 with Cooling Fan, 4 × Aluminum Heatsinks, 5V 3A USB-C Power Supply with ON/Off Switch for Raspberry Pi 4 Model B

Miuzei Case for Raspberry Pi 4 with Cooling Fan, 4 × Aluminum Heatsinks, 5V 3A USB-C Power Supply with ON/Off Switch for Raspberry Pi 4 Model B

Feature

6. SmartiPi Touch 2 – Case for The Official Raspberry Pi 7" Touchscreen Display – with Cooling Fan

SmartiPi Touch 2 - Case for The Official Raspberry Pi 7" Touchscreen Display - with Cooling Fan

Feature

7. iUniker Raspberry Pi 4 Case, Raspberry Pi 4b Case with Fan Raspberry Pi Fan Case with Raspberry Pi 4 Heatsink Raspberry Pi Heatsink for Raspberry Pi 4 Model B/Pi 3B+/ Pi 3B/ 2B

iUniker Raspberry Pi 4 Case, Raspberry Pi 4b Case with Fan Raspberry Pi Fan Case with Raspberry Pi 4 Heatsink Raspberry Pi Heatsink for Raspberry Pi 4 Model B/Pi 3B+/ Pi 3B/ 2B

Feature

8. Argon Fan HAT for Raspberry Pi 4, Raspberry Pi 3B, and Raspberry Pi 3 B+ | Includes 40mm Fan and Power Button | Provides Safe Shutdown, Forced Shutdown, and Rebooting

Argon Fan HAT for Raspberry Pi 4, Raspberry Pi 3B, and Raspberry Pi 3 B+ | Includes 40mm Fan and Power Button | Provides Safe Shutdown, Forced Shutdown, and Rebooting

Feature

Description

The Argon Fan HAT is a simple Raspberry Pi HAT that cools the Pi and gives it a safe shutdown button. With just a one-line script, you’ll have full functionality for the HAT, allowing you to do additional features such as rebooting the pi, and adjusting the fan speed of the single board computer. You can even program when the fan adjusts its speed, giving you full control over the HAT. Get ready to use this in any Raspberry Pi Case that offers HAT support, such as the Argon POLY+ or the Argon NEO. The best part is that this will work for the Raspberry Pi 4 Model B, the Raspberry Pi 3 Model B, and the Raspberry Pi 3 B+.

9. GeeekPi Acrylic Case for Raspberry Pi 4 Model B & Raspberry Pi 3 Model B+, Raspberry Pi Case with Cooling Fan and 7PCS Heatsinks for Raspberry Pi 3/2 Model B/B+ (Brown)

GeeekPi Acrylic Case for Raspberry Pi 4 Model B & Raspberry Pi 3 Model B+, Raspberry Pi Case with Cooling Fan and 7PCS Heatsinks for Raspberry Pi 3/2 Model B/B+ (Brown)

Feature

10. GeeekPi Raspberry Pi Cooling Fan, Raspberry Pi ICE Tower Cooler, RGB Cooling Fan with Raspberry Pi Heatsink for Raspberry Pi 4 Model B & Raspberry Pi 3B+ & Raspberry Pi 3 Model B

GeeekPi Raspberry Pi Cooling Fan, Raspberry Pi ICE Tower Cooler, RGB Cooling Fan with Raspberry Pi Heatsink for Raspberry Pi 4 Model B & Raspberry Pi 3B+ & Raspberry Pi 3 Model B

Feature

Conclusion

By our suggestions above, we hope that you can found Raspberry Pi 3 Cooling Fan Case for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general