Top 9 Silicone Rubber Heating

Silicone rubber heating tape with adjustable controller, 1″ x 4′ heating tape, 288 watts, 120VAC, thermostat adjustable between 50F to 425F, maximum exposure temperature of 450F, moisture and chemical resistant, 6-foot power cord with plug.

This 1in wide, 72in long XtremeFLEX BSAT heating tape comes with a compact time percentage dial control built-in. The time percentage controller varies the proportion (length) of time the heater is in the ‘on’ or ‘off’ heating mode. The heating application will determine the actual percentage set-point required. The controller does not use a temperature sensor and therefore satisfactory operation requires occasional supervision under changing load conditions. Moisture and chemical resistant silicone rubber makes up the extruded outer sheath. It has a uniform, fiberglass-reinforced, serpentine-wound multi-stranded heating element and is suitable for electrically conductive surfaces. The tape can tolerate a maximum exposure temperature of 450°F (232°C). The power density is 6.0watts/sq. in (0.009watts/sq. mm). BSAT silicone rubber heating tape provides exceptional heater flexibility, durability, and uniformity with a rapid heat-up and thermal response. It is ideal for a wide range of temporary heating applications and surfaces such as laboratory, valves, facilities maintenance, and more. It includes a 6ft (2m) long power cord with a 120VAC standard 2-prong NEMA 1-15 plug. Includes Time Percentage Control. Material: Silicone Rubber. Maximum Exposure Temperature: 450°F (232°C). Power Density: 6watts/sq. in (0.009watts/sq. mm). Width: 1in (25mm). Length: 72in (1830mm). Total Watts: 432. Voltage: 120VAC. Brisk Heat #: BSAT101006.