Top 9 Vacuum Solder Sucker

Feature

• 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and “vacuum” button, which make the sucking power awesome.
• 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
• 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
• 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
• 【Widely used Solder Remover】 The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.

Feature

• Tip temperature +788°F (+420°C)
• UL & C UL approved
• 45 watt

Feature

• Good little solder sucker,have a good bit of suction,you can just hang onto it and use your thumb to reset and suck
• Simple design allows easy one-handed use,lightweight and compact,suck the solder away easily
• Very sturdy,will worke good to remove existing solder from a circuit board
• Heated up the solder pushed the button and bam,all solder sucked up,super easy to use for desoldering
• A must have excellent solder sucker which fits nicely in your tool box

Feature

• The vacuum desoldering station designed for lead free desoldering especially. The quick heating and strong power are for convenient and clear soldering/desoldering all types of DIP components.
• Reasonable structure, single hand operation and strong absorbing power can easily remove of the residual solder from one-sided or two sided of the PCB.
• The desoldering iron gun if controlled automatically by the micro-processor.
• The heating element is made of PTC and the sensor on the desoldering tip can control the desoldering temperature quickly and accurately.
• LCD (display data: set temperature, actual temperature)

Feature

• Innovative Silicone Nozzle allows closer placement to soldering iron tip (therefore better suction & better solder removal)
• Compact design allows easy one handed operation
• Withstands direct contact with soldering iron (350C Max)
• Highest quality construction & components used

Feature

• Easy, single handed operation
• Desoldering pump with heater
• Spare tip (not included): BIT/DESOL3

Feature

Feature

• 【ONE-HANDED USE DESIGN】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready.
• 【HIGH QUALITY AND POWERFUL SUNCTION】 The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.
• 【ALLOY BRAIDED SOLDER WICK】 Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
• 【DURABLE DESOLDERING IRON TOOL】 The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time.
• 【A MUST-HAVE SOLDER REMOVAL KIT】 The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards.

Feature

• High quality desoldering braid with unique no clean flux and gemetrically- precise weave
• Pure oxygen free copper wire with 0.1″W x 5’L, weight 0.4oz
• Excellent thermal transfer for faster, safer desoldering using lower temperature irons
• High Quality Solder Sucker & Light Material: Super high pressure vacuum with aluminum body frame with right size: 7-1/2″ length x 3/4″ diameter
• Special Design: Right or Left handed design allows easy one-handed use